Chassis Cooling - Cisco Catalyst 4900M Installation Manual
Cisco systems switch installation guide
Hide thumbs
Also See for Cisco Catalyst 4900M:
- Installation manual (152 pages) ,
- Troubleshooting manual (6 pages) ,
- Configuration handbook (359 pages)
Table of Contents
Advertisement
Catalyst 4900M Switch Chassis
Table 1-3
LED
Fan
(front and rear)
PS1 and PS2
(front)
LINK
1. If either LED is green and the other is OFF the power supply is probably not plugged in. If it is red, the
Chassis Cooling
The hot-swappable chassis fan tray (WS-X4992) provides cooling air for the internal chassis
components. The fans draw air in from the right side of the chassis and exhaust the heated air through
perforations on the right side of the chassis.
Caution
When the fan tray is removed, internal circuitry is exposed that should not be touched by tools or fingers.
The system should not operate without a fan tray for longer than is necessary to replace a faulty fan tray
with a new fan tray.
Figure 1-4
Cisco Catalyst 4900M Switch Installation Guide
1-6
Front Panel LED Descriptions (continued)
Description
FAN LED indicates the fan tray status.
Green—Fan tray operational.
•
Red—Fault detected. One or more fans not functional.
•
Off—No power to the fan tray.
•
PS1 and the PS2 LEDs indicates the internal power supply status.
•
Off—No power to the power supply.
•
Green—Operational.
•
Red—Fault detected or the on/off switch is set to off while the
power supply is plugged in.
A link status LED is located below the 10-GB uplink ports.
supply is either plugged in and not switched on or it is faulty. It may be necessary to interrogate the system
for further status using the CLI.
shows the direction of airflow through the switch.
1
Chapter 1
Product Overview
78-18350-02
Advertisement
Table of Contents
Troubleshooting
