This unit is intended for installation in restricted access areas. A restricted
Warning
access area can be accessed only through the use of a special tool, lock and
key, or other means of security. Statement 1017
Warning
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available. Statement 1024
Only trained and qualified personnel should be allowed to install, replace, or
Warning
service this equipment. Statement 1030
To prevent the system from overheating, do not operate it in an area that
Warning
exceeds the maximum recommended ambient temperature of:
140°F (60°C) Statement 1047
Warning
This equipment is supplied as "open type" equipment. It must be mounted
within an enclosure that is suitably designed for those specific environmental
conditions that will be present and appropriately designed to prevent personal
injury resulting from accessibility to live parts. The interior of the enclosure
must be accessible only by the use of a tool.
The enclosure must meet IP 54 or NEMA type 4 minimum enclosure rating
standards. Statement 1063
This equipment is intended to be grounded to comply with emission and
Warning
immunity requirements. Ensure that the switch functional ground lug is
connected to earth ground during normal use. Statement 1064
Cisco IE 3000 Switch Getting Started Guide
14
Cisco IE 3000 Switch Getting Started Guide
OL-16234-01