Table of Contents
Advertisement
Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases
# cd /opt/sfw/etc
Step 4
Use vi to open the sudoers file.
# vi sudoers
Step 5
Uncomment the line under the section title, Same thing without a password, and add the group name that
you want to allow the people in that group to run all commands.
In this example, you allow the people in the mgcusr group to run all commands. The file should have a
section similar to the following one:
# Same thing without a password
mgcusr
Note
You must also have enabled sudo in step 8 of the
section.
If you need to make further changes to the sudo policy, edit the policy in /etc/sudoers.
Installing the License File
To manage licenses, Cisco PGW 2200 Softswitch provides license files that are stored in a directory
where Cisco PGW 2200 Softswitch obtains the required license information.
Cisco PGW 2200 Softswitch uses the license file to enforce the capacity and features available. For more
information about License features on the Cisco PGW 2200 Softswitch, see the Licensing Features for
the PGW 2200 at:
http://www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/feature/module/9.7_3_/FlexLM.html
Note
You must install the license file on both the active and the standby Cisco PGW 2200 Softswitch for it to
function properly.
Installing the License File if the Cisco PGW 2200 Softswitch is NOT Running
If the Cisco PGW 2200 Softswitch is not in a running state, perform the following steps.
Save the license file (.lic) to a temporary directory on your hard disk.
Step 1
Copy the license file to the /opt/CiscoMGC/license directory of the Cisco PGW 2200 Softswitch.
Step 2
Licenses are cumulative, so there can be multiple license files of the same type.
Log in as root.
Step 3
Enter the following command to start the Cisco PGW 2200 Softswitch:
Step 4
# /etc/init.d/CiscoMGC start
The license file loads automatically.
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
3-16
Chapter 3
ALL=(ALL)
NOPASSWD:ALL
Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher
Installing the Cisco Security Package (CSCOh020)
OL-18083-14
Advertisement
Table of Contents
