Table of Contents
Advertisement
SNMP Commands
snmp-server v3-host
snmp-server v3-host
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
User Guidelines
When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view
for that recipient is automatically generated for all the MIB.
When configuring an SNMPv1 notification recipient, the Inform option cannot be
selected.
If a trap and inform are defined on the same target, and an inform was sent, the
trap is not sent.
Example
The following example enables SNMP traps for host 10. 1 . 1 . 1 with community string
"management" using SNMPv2.
Console(config)# snmp-server host 10.1.1.1 management 2
The snmp-server v3-host Global Configuration mode command specifies the
recipient of Simple Network Management Protocol Version 3 notifications. Use the
no form of this command to remove the specified host.
Syntax
snmp-server v3-host {
auth | priv} [udp-port
no snmp-server v3-host {
Parameters
•
ip-address
— Specifies the IP address of the host (targeted recipient).
•
hostname
— Specifies the name of the host. (Range:1-158 characters)
•
username —
Specifies the name of the user to use to generate the
notification. (Range: 1-24)
•
traps — Indicates that SNMP traps are sent to this host.
ip-address
hostname
|
port
filtername
] [filter
ip-address
|
hostname
username
}
[traps | informs] {noauth |
seconds
] [timeout
] [retries
}
username
[traps | informs]
26
retries
]
344
Hide quick links:
Advertisement
Table of Contents
