hit counter script
Sony HCD-SHAKE33 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HCD-SHAKE33
  6. Service manual

Sony HCD-SHAKE33 Service Manual

Hide thumbs Also See for HCD-SHAKE33:
Table of Contents

Advertisement

Quick Links

HCD-SHAKE33/SHAKE77
SERVICE MANUAL
Ver. 1.0 2014.01
• HCD-SHAKE33 is the tuner, USB, CD
r, USB, CD
player, Bluetooth, NFC and amplifi er
d amplifier
section in SHAKE-33.
• HCD-SHAKE77 is the tuner, USB, CD
player, Bluetooth, NFC and amplifi er
section in SHAKE-77.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(US model only)
SHAKE-33
With 4 ohm loads, both channels driven, from
40 – 600 Hz; rated 180 watts per channel
minimum RMS power, with no more than
0.7% total harmonic distortion from 250
milliwatts to rated output.
Amplifi er section
The following are measured at
US model:
AC 120 V, 60 Hz
MX model:
AC 120 V – 240 V, 60 Hz
AEP, UK model:
AC 220 V – 240 V, 50/60 Hz
E51 model:
AC 220 V – 240 V, 50 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
SHAKE-77
WF (Woofers)/MID (Mid speakers)/
TW (Tweeters)
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
SW (Subwoofers)
RMS output power (reference):
1,200 W + 1,200 W (per channel at
8 ohms, 100 Hz)
SHAKE-33
WOOFERS
Power Output (rated):
350 W + 350 W (at 4 ohms, 100 Hz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 100 Hz)
MID (Mid speakers)/TWEETERS
RMS output power (reference):
500 W + 500 W (per channel at
5 ohms, 1 kHz)
9-890-648-01
Sony Corporation
2014A80-1
Published by Sony EMCS (Malaysia) PG Tec
©
2014.01
Photo: HCD-SHAKE77
CD Section
SPECIFICATIONS
Inputs
AUDIO IN 1/PARTY CHAIN IN L/R
Voltage 2 V, impedance 47 kilohms
AUDIO IN 2 L/R
Voltage 2 V, impedance 47 kilohms
MIC (SHAKE-77 only)
Sensitivity 1 mV, impedance 10 kilohms
(USB) A,
(USB) B port
Type A
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R
Voltage 2 V, impedance 1 kilohm
USB section
Supported bit rate
WMA:
48 kbps – 192 kbps, VBR, CBR
AAC:
48 kbps – 320 kbps, VBR, CBR
Sampling frequencies
WMA: 44.1 kHz
AAC: 44.1 kHz
Supported USB device
Mass Storage Class
Maximum current
500 mA
Disc/USB section
Supported bit rate
MPEG1 Layer-3:
32 kbps – 320 kbps, VBR
MPEG2 Layer-3:
8 kbps – 160 kbps, VBR
MPEG1 Layer-2:
32 kbps – 384 kbps, VBR
Sampling frequencies
MPEG1 Layer-3:
32 kHz/44.1 kHz/48 kHz
MPEG2 Layer-3:
16 kHz/22.05 kHz/24 kHz
MPEG1 Layer-2:
32 kHz/44.1 kHz/48 kHz
Model Name Using Similar Mechanism
CD Mechanism Type
Optical Pick-up Name
Disc player section
System
Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 µW
* This output is the value
measurement at a distance of
200 mm from the objective lens
surface on the Optical Pick-up
Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 88 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM lead antenna
AM loop antenna
FM tuner section
Tuning range
US model:
87.5 MHz – 108.0 MHz (100 kHz step)
Other models:
87.5 MHz – 108.0 MHz (50 kHz step)
AM tuner section
Tuning range
AEP, UK model:
531 kHz – 1,602 kHz (9 kHz step)
AUS, E2, E51, US, MX models:
531 kHz – 1,710 kHz (9 kHz step)
530 kHz – 1,710 kHz (10 kHz step)
Other models:
531 kHz – 1,602 kHz (9 kHz step)
530 kHz – 1,610 kHz (10 kHz step)
HOME AUDIO SYSTEM
US Model
AEP Model
UK Model
HCD-SHAKE33
E Model
HCD-SHAKE33/SHAKE77
Australian Model
HCD-SHAKE77
NEW
CDM90-DVBU202//M
CMS-S76RFS7G
Bluetooth section
Communication system
Bluetooth Standard version 3.1
Output
Bluetooth Standard Power Class 2
Maximum communication range
Line of sight approx. 10m
1)
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
2)
Compatible Bluetooth profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
SPP (Serial Port Profile)
Supported codecs
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
1)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna's performance, operating system,
software application, etc.
2)
Bluetooth standard profiles indicate the
purpose
of
Bluetooth
communication
between devices.
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-SHAKE33

Summary of Contents for Sony HCD-SHAKE33

  • Page 1 Ver. 1.0 2014.01 UK Model HCD-SHAKE33 E Model HCD-SHAKE33/SHAKE77 Australian Model HCD-SHAKE77 • HCD-SHAKE33 is the tuner, USB, CD r, USB, CD player, Bluetooth, NFC and amplifi er d amplifier section in SHAKE-33. Photo: HCD-SHAKE77 • HCD-SHAKE77 is the tuner, USB, CD player, Bluetooth, NFC and amplifi...
  • Page 2 Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are return to chassis, must not exceed 0.5 mA (500 microamperes).

  • Page 3: Table Of Contents

    HCD-SHAKE33/SHAKE77 TABLE OF CONTENTS SERVICING NOTES ..........6-24. Printed Wiring Board - STR Board (SHAKE33) - ..55 6-25. Schematic Diagram - STR Board (SHAKE33) - .... 56 DISASSEMBLY 6-26. Printed Wiring Board - STR Board (SHAKE77) 2-1. Overall Case ..............10 (Component Side) - ............

  • Page 4: Servicing Notes

    (LF) indicating the solder contains no lead. HCD-SHAKE77 : MX 4-479-323-2[] (Caution: Some printed circuit boards may not come printed with HCD-SHAKE33 : E2, E51 4-479-422-0[] the lead free mark due to their particular size) HCD-SHAKE33 : US...
  • Page 5 3. Press the [ ] button and [n/ +] button simultaneously and For example, select “SONY : SHAKE-77/SHAKE-33”. If hold down for around 5 seconds. passkey is required on the Bluetooth device, enter “0000”. 4. The message “UNLOCKED” is displayed and the disc tray is 7.
  • Page 6 HCD-SHAKE33/SHAKE77 Playing music from a Bluetooth device For a Bluetooth device 1. Press the [ ] button to turn the power on. 2. Press BLUETOOTH on the unit to select Bluetooth function. “BLUETOOTH” appears in the display panel. 3. Establish connection with the Bluetooth device.
  • Page 7 Note: Push after it inserts it in this hole well. – Top view – CAPACITOR DISCHARGE FOR ELECTRIC SHOCK PREVENTION Switching Regulator Board (Conductor side view) (HCD-SHAKE33) In checking the Switching Regulator board, make 3 capacitors discharge of C221, C602 and C618 for eletrical shock prevention. 800 :/5 W...
  • Page 8 HCD-SHAKE33/SHAKE77 Switching Regulator Board (Conductor side view) (HCD-SHAKE77) In checking the Switching Regulator board, make 3 capacitors discharge of C20, C28 and C18 for eletrical shock prevention. 800 :/5 W 800 :/5 W 800 :/5 W PRECAUTION WHEN INSTALLING A NEW OP UNIT/PRECAUTION BEFORE UNSOLDERING THE STATIC ELECTRICITY PREVENTION SOLDER BRIDGE (CDM90-DVBU202//M) When installing a new OP unit, be sure to connect the fl...

  • Page 9: Disassembly

    HCD-SHAKE33/SHAKE77 SECTION 2 DISASSEMBLY Note: Disassemble the unit in the order as shown below. 2-1. OVERALL CASE (Page 10) 2-2. BACK PANEL SECTION (Page 11) 2-3. LOADING PANEL ASSY (Page 11) 2-4. CDM90-DVBU202//M (Page 12) 2-5. FRONT PANEL SECTION (Page 13) 2-6.

  • Page 10: Overall Case

    HCD-SHAKE33/SHAKE77 Note: Follow the disassembly procedure in the numerical order given. 2-1. OVERALL CASE 2 two screws (+BVTP 3 u 8) (BLACK) 3 protector, rear L 1 four screws (+BVTP 3 u 8) (BLACK) 9 case, overall 6 three screws...

  • Page 11: Back Panel Section

    HCD-SHAKE33/SHAKE77 2-2. BACK PANEL SECTION ‡ :LUH VHWWLQJ 6CH DAMP board rear side MOTHERBOARD board 3 two screws (+BVTP 3 u 8) (BLACK) 1 CN1002 (3P) (SHAKE77) 4 two screws CN1003 (3P) (SHAKE33) (+BVTP 3 u 8) (BLACK) 5 three screws...

  • Page 12: Cdm90-Dvbu202//M

    HCD-SHAKE33/SHAKE77 2-4. CDM90-DVBU202//M ‡ :LUH VHWWLQJ CDM90-DVBU202//M rear side 6 four screws (+BVTP 3 u 8) MOTHERBOARD board 9 CDM90-DVBU202//M 1 CN401 (6P) 7 boss 3 wire (flat type) (24 core) Note: When you install the CD (CN302) drive (CDM90-DVBU202//M),...

  • Page 13: Front Panel Section

    HCD-SHAKE33/SHAKE77 2-5. FRONT PANEL SECTION 2 wire (flat type) (23 core) (CN109) 1 wire (flat type) (10 core) (CN102) 5 one screw (+PWH 3 u 8 (SUMITITE)) 7 front panel section 3 wire (flat type) (8 core) (CN105) 4 five screws (+BVTP 3 u 8) 2-6.

  • Page 14: 4Ch Damp Board (Shake33), 6Ch Damp Board (Shake77)

    HCD-SHAKE33/SHAKE77 2-7. 4CH DAMP BOARD (SHAKE33), 6CH DAMP BOARD (SHAKE77) (SHAKE33) (SHAKE77) ‡ :LUH VHWWLQJ ‡ :LUH VHWWLQJ front side bracket, tunnel (M7) bracket, tunnel (M3) REGULATOR, SWITCHING (3H401W) SWITCHING REGULATOR (SSN-GBR) front side 3 two screws 2 four screws...

  • Page 15: Regulator, Switching (3H401W) (Shake33), Switching Regulator (Ssn-Gbr) (Shake77)

    HCD-SHAKE33/SHAKE77 2-8. REGULATOR, SWITCHING (3H401W) (SHAKE33), SWITCHING REGULATOR (SSN-GBR) (SHAKE77) (SHAKE33) (SHAKE77) 1 three screws 1 three screws (+BV3 (3-CR)) (+BV3 (3-CR)) 2 chassis, sub (M7) 2 chassis, sub (M7) 1 three screws 1 three screws (+BV3 (3-CR)) (+BV3 (3-CR))

  • Page 16: Service Optical Device, Wire (Flat Type)

    HCD-SHAKE33/SHAKE77 2-9. SERVICE OPTICAL DEVICE, WIRE (FLAT TYPE) Note 1 : Before disconnecting the wire (fl at type) (24 core) of optical pick-up block, solder the short-land. 2 chuck holder assy (T) 2 Solder the short-land. 1 six claws Note 2: When assembling the service optical device, remove the solder of short-land after connecting the wire (flat type) (24 core).

  • Page 17: Test Mode

    HCD-SHAKE33/SHAKE77 SECTION 3 TEST MODE [PANEL TEST MODE] This mode is used to check the fl uorescent indicator tube, LEDs, keys, [VOLUME/DJ CONTROL] jog, model, destination and software version. Procedure: 1. Press [OPTIONS] button and [FOOTBALL] button simultane- ously and hold 3 seconds.
  • Page 18 HCD-SHAKE33/SHAKE77 [USER RESET] The user reset clears all data including preset data stored in the data fl ash to initial conditions exclude history mode data. Procedure: 1. Press [ ] button to turn on the system. 2. Press [ ] button and [LED COLOR] button simultaneously for 3 seconds.
  • Page 19 HCD-SHAKE33/SHAKE77 [HISTORY MODE] This mode is used to check important data stored in the system when PROTECTOR happen. Procedure: 1. During demo mode, press [OPTIONS] button and [FLANGER] button for 5 seconds to mode into history mode. 2. Press the [TUNING +/M >...
  • Page 20 HCD-SHAKE33/SHAKE77 [MODEL & DEST WRITE MODE] This mode is used to set software model & destination. This mode only available when no permanent model & destination is stored. Procedure: 1. Press [MOVIE/GAME] button & [LED PATTERN] button simultaneously and hold for 5 seconds.

  • Page 21: Electrical Check

    HCD-SHAKE33/SHAKE77 SECTION 4 ELECTRICAL CHECK TUNER SECTION VOLT/DIV: 200 mV 0 dB = 1 V TIME/DIV: 500 ns FM AUTO STOP CHECK level: signal 1.1 ± 0.25 Vp-p (DVDSL) generator 1.0 ± 0.25 Vp-p (CD) Checking Location: – -MOTHERBOARD Board (CONDUCTOR SIDE)- Procedure: 1.

  • Page 22: Troubleshooting

    Switching Regulator Diagnosis Flow (HCD-SHAKE33) AC IN The Power Control signal to Switching regulator is checked. Is following power voltage OK? Checks whether the state of a Cable and Outlet are normal. If there are no problems, checks circumference circuit for Main on/Sub on Output of Main mount side.
  • Page 23 Switching Regulator Diagnosis Flow (HCD-SHAKE77) (11) AC IN (18) (17) (10) The Power Control signal to SMPS as below voltage? Check whether state of cable and outlet are normal. P-cont ECO Mode Demo Mode Power On If there are no problem, check (16) CN4 Pin1: Low (0V)
  • Page 24 Optical Block Diagnosis Flow (HCD-SHAKE33/SHAKE77) (1/2) REMOVE TOP PANEL TURN ON TRAY IN Checks IC303 circumference circuit for +1.2V. No Checks CL335 for +3.3V and +1.2V REG IC303. Does Optical pickup move to inner circumference? Checks IC002 (JL040) circumference circuit for (Visual check) Does it output the power voltage of 3.3V and 1.2V?
  • Page 25 Optical Block Diagnosis Flow (HCD-SHAKE33/SHAKE77) (2/2) Does laser diode become luminous? Checks JL306 (LD780) signal. Checks circumference circuit of Q402. (Visual check) Does it output 2V when laser become luminous? Checks circumference circuit of IC301 LD01. The Optical pickup has a problem.
  • Page 26 DAMP / MOTHERBOARD Mount Diagnosis Flow (HCD-SHAKE33/SHAKE77) (1/2) PLAY MUSIC Reinserts the cable or Exchanges. Is there audio output from DAMP Board? Checks 13V output of CN001 1pin(Main ON). If there are no problems, checks output of Is the power voltage OK? Switching Regulator Board.
  • Page 27 DAMP / MOTHERBOARD Mount Diagnosis Flow (HCD-SHAKE33/SHAKE77) (2/2) Checks OUT Terminal 5V output of REG IC1000 or, Checks circumference circuit of REG IC1000. checks GND and OUT Terminal with Tester. If there are no problems, exchanges IC1000. Is it shorted out? Checks OUT Terminal -5V output of REG IC1001 or, Checks circumference circuit of REG IC1001.
  • Page 28 MOSFET Confi rmation for 4CH DAMP Mount (SHAKE33) CL1065 CL1064 CL1023 CL1028 CL1027 CL1022 CL1021 CL1020 CL1026 CL1029 R1260 R1253 R1228 R1232 R1359 R1326 CL1069 CL1072 CL1066 CL1063 CL1034 CL1108 Tester Tester Tester Tester CL1033 CL1110 CL1106 CL1099 CL1101 CL1103 C1184 CL1105 C1178...
  • Page 29 MOSFET Confi rmation for 6CH DAMP Mount (SHAKE77) Q1018, Q1047, Q1056 CL1211 CL1212 CL1025 CL1024 CL1023 CL1022 CL1028 CL1029 CL1030 CL1031 CL1034 CL1170 CL1188 CL1193 CL1175 CL1178 CL1185 C1511 R1542 R1458 R1428 R1157 R1131 R1058 R1057 R1541 CL1224 CL1220 CL1221 C1512 Tester Tester...

  • Page 30: Diagrams

    HCD-SHAKE33/SHAKE77 SECTION 6 DIAGRAMS • Circuit Boards Location 4CH DAMP board (SHAKE33) 6CH DAMP board (SHAKE77) MOTHERBOARD board TUNER board REGULATOR, SWITCHING (3H401W) (SHAKE33) SWITCHING REGULATOR (SSN-GBR) (SHAKE77) MS-476 board BLUETOOTH module FL board STR board MIC board RC-S801/A (WW)

  • Page 31: Block Diagram - Rs Servo, Usb Section

    HCD-SHAKE33/SHAKE77 6-1. BLOCK DIAGRAM - RS SERVO, USB Section - 5),3 92$ $ 5)B& 92% % 5)B% 92& & 5)B$ 92' ' 5)B' ;7$/2 92( ( * 5)B) 92) ) + 5)B( 9& ;7$/, &1 6+$.( &1 6+$.( $872 32:(5 &75/ 86%B'0 3/$<...

  • Page 32: Block Diagram - Main Section

    HCD-SHAKE33/SHAKE77 6-2. BLOCK DIAGRAM - MAIN Section - AUDIO PARTY CHAIN OUT J602 (2/2) SIGNAL SHAKE77 SELECTOR OP AMP IC602 ANALOG STEREO A/D IC601 SELECTOR MIC AMP CONVERTER Q605, Q607 IC2201 IC609 OUT 1 J2201 X 13 OUT 7 MUTE SW...

  • Page 33: Block Diagram - Amp Section (Shake33)

    HCD-SHAKE33/SHAKE77 6-3. BLOCK DIAGRAM - AMP Section (SHAKE33) - SHAKE33 POWER AMP OP AMP TB1000 +63V IC1009 IC1015 DIGITAL AUDIO MOSFET OP AMP Q1023 PGND GRAY OUT_1 IC612 (1/2) VS 13 RESET FRONT-L 3 +IN_1 SWITCH DIGITAL AUDIO MOSFET WOOFERS...

  • Page 34: Block Diagram - Amp Section (Shake77)

    HCD-SHAKE33/SHAKE77 6-4. BLOCK DIAGRAM - AMP Section (SHAKE77) - SHAKE77 OP AMP POWER AMP +63V TB1000 IC1018 IC1004 IMPEDANCE OP AMP DIGITAL AUDIO MOSFET IC612 Ÿ WF/MID/TW Q1009 PGND OUT_1 FRONT-L 3 +IN_1 VS 13 LEFT OUT_2 7 DIGITAL AUDIO MOSFET...

  • Page 35: Block Diagram - Panel, Power Supply Section

    HCD-SHAKE33/SHAKE77 6-5. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section - SPM-C-MON VACUUM PROTECTION CONTROL FL-SOUT PCONT-DAMP FLUORESCENT Q576 FL-CLK +3.3V REG. DISPLAY FL-LATCH IC002 POWER CONTROL ND2001 (SHAKE33) 134 FL-BK ND2000 (SHAKE77) PCONT-BTSTBY PROTECTION PROTECTION CONTROL Q009 +1.2V VIN1 Q575 +3.3V...
  • Page 36 HCD-SHAKE33/SHAKE77 • Note for Printed Wiring Boards and Schematic Diagrams • Waveforms – MOTHERBOARD Board – Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in —F unless otherwise noted. (p: pF) IC451 8 (X2) •...

  • Page 37: Printed Wiring Board - Motherboard Board (Component Side)

    HCD-SHAKE33/SHAKE77 6-6. PRINTED WIRING BOARD - MOTHERBOARD Board (Component Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. MOTHERBOARD BOARD (COMPONENT SIDE) J602 AUDIO IN 1 AUDIO OUT AUDIO PARTY PARTY IN 2 CHAIN IN CHAIN OUT Ú...

  • Page 38: Motherboard Board (Conductor Side)

    HCD-SHAKE33/SHAKE77 6-7. PRINTED WIRING BOARD - MOTHERBOARD Board (Conductor Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. MOTHERBOARD BOARD (CONDUCTOR SIDE) Ú SHAKE33 ¾ SHAKE77 SERVICE USE CN502 LED SPEAKER CN101 Q012, Q605,...

  • Page 39: Schematic Diagram - Motherboard Board (1/8)

    HCD-SHAKE33/SHAKE77 6-8. SCHEMATIC DIAGRAM - MOTHERBOARD Board (1/8) - • See page 71 for IC Block Diagrams. >006S MOTHERBOARD BOARD (1/8) DIN1 ARAGON-BCK3 MOTHER- ARAGON-LRCK3 BOARD >001S BOARD DIN3 MOTHERBOARD BOARD (2/8) SRC-RST0 (8/8) DOUT3 (Page 40) (Page 46) C675 R733 0.1u...

  • Page 40: Schematic Diagram - Motherboard Board (2/8)

    HCD-SHAKE33/SHAKE77 6-9. SCHEMATIC DIAGRAM - MOTHERBOARD Board (2/8) - • See page 71 for IC Block Diagrams. >004S >008S MOTHERBOARD BOARD (8/8) MOTHERBOARD BOARD (1/8) (Page 46) (Page 39) CN851 MOTHERBOARD BOARD (2/8) JL623 R859 IISD (data audio) JL624 >009S...

  • Page 41: Schematic Diagram - Motherboard Board (3/8)

    HCD-SHAKE33/SHAKE77 6-10. SCHEMATIC DIAGRAM - MOTHERBOARD Board (3/8) - • See page 71 for IC Block Diagrams. • See page 78 for IC Pin Function Descriptions. >013S >014S >007S MOTHERBOARD MOTHERBOARD BOARD (3/8) MOTHERBOARD MOTHERBOARD BOARD BOARD BOARD (1/8) (4/8)

  • Page 42: Schematic Diagram - Motherboard Board (4/8)

    HCD-SHAKE33/SHAKE77 6-11. SCHEMATIC DIAGRAM - MOTHERBOARD Board (4/8) - • See page 71 for IC Block Diagrams. MOTHERBOARD BOARD (4/8) R433 CL413 FE_3.3V_1 CL412 CL415 CL414 Q402 Q401 2SA2119K 2SA2119K AUTO POWER AUTO POWER C420 C423 R431 CTRL R422 R432...

  • Page 43: Schematic Diagram - Motherboard Board (5/8)

    HCD-SHAKE33/SHAKE77 6-12. SCHEMATIC DIAGRAM - MOTHERBOARD Board (5/8) - • See page 36 for Waveforms. • See page 71 for IC Block Diagrams. MOTHERBOARD BOARD (5/8) C454 C456 C457 0.1u X451 12MHz 3.3 3.3 3.3 1.1 >027S >028S MIC BOARD...

  • Page 44: Schematic Diagram - Motherboard Board (6/8)

    HCD-SHAKE33/SHAKE77 6-13. SCHEMATIC DIAGRAM - MOTHERBOARD Board (6/8) - >032S >034S >031S MOTHERBOARD BOARD (5/8) MOTHERBOARD BOARD (7/8) MOTHERBOARD BOARD (5/8) (Page 43) (Page 45) (Page 43) JC010 MOTHERBOARD BOARD (6/8) JL059 FL+13V JC009 R064 Q011 KTA1542T-RTK/P JL061 PROTECTION LED+5.2V CONTOL >035S...

  • Page 45: Schematic Diagram - Motherboard Board (7/8)

    HCD-SHAKE33/SHAKE77 6-14. SCHEMATIC DIAGRAM - MOTHERBOARD Board (7/8) - • See page 71 for IC Block Diagrams. MOTHERBOARD BOARD (7/8) >035S LED+5.2V MOTHERBOARD BOARD (6/8) EVER+13V CN107 (Page 44) D105 D104 DEBUG-RXD(MD-BOOT1) CN111 RB520SM-30T2R RB520SM-30T2R JL196 MD BOOT1 TEST-MON0/SD_D2_0 JL197...

  • Page 46: Schematic Diagram - Motherboard Board (8/8)

    HCD-SHAKE33/SHAKE77 6-15. SCHEMATIC DIAGRAM - MOTHERBOARD Board (8/8) - • See page 36 for Waveforms. • See page 71 for IC Block Diagrams. • See page 78 for IC Pin Function Descriptions. MOTHERBOARD BOARD (8/8) >024S MOTHERBOARD R113 HUB-RST >038S HUB-RST EVER+3.3V...

  • Page 47: Printed Wiring Board

    HCD-SHAKE33/SHAKE77 6-16. PRINTED WIRING BOARD - 4CH DAMP Board (SHAKE33) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. 4CH DAMP BOARD 4CH DAMP BOARD (SHAKE33) (SHAKE33) (COMPONENT TB1000 TB1001 (CONDUCTOR SIDE) WOOFERS MID/TWEETERS GRAY...

  • Page 48: 4Ch Damp Board (Shake33) (1/2)

    HCD-SHAKE33/SHAKE77 6-17. SCHEMATIC DIAGRAM - 4CH DAMP Board (SHAKE33) (1/2) - R1000 4CH DAMP R1001 BOARD 120k R1002 (SHAKE33) R1003 (1/2) C1000 Q1003 4.7u LTA014EUBFS8TL R1010 R1004 PROTECTION SWITCH 120k CL1035 C1004 C1006 22u 35V C1005 22u 35V R1009 -46V...

  • Page 49: 4Ch Damp Board (Shake33) (2/2)

    HCD-SHAKE33/SHAKE77 6-18. SCHEMATIC DIAGRAM - 4CH DAMP Board (SHAKE33) (2/2) - • See page 71 for IC Block Diagrams. >047S 4CH DAMP BOARD (2/2) C1166 R1646 4CH DAMP (SHAKE33) GVDD 470p CL1074 R1195 BOARD PGND R1199 R1197 R1316 R1208 D1025 ~ D1026 2.2k...

  • Page 50: Printed Wiring Board - 6Ch Damp Board (Shake77) (Component Side)

    HCD-SHAKE33/SHAKE77 6-19. PRINTED WIRING BOARD - 6CH DAMP Board (SHAKE77) (Component Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. 6CH DAMP BOARD (SHAKE77) TB1000 TB1001 LEFT SPEAKERS RIGHT SPEAKERS GRAY BLACK (COMPONENT WF/MID/TW...

  • Page 51: Printed Wiring Board - 6Ch Damp Board (Shake77) (Conductor Side)

    HCD-SHAKE33/SHAKE77 6-20. PRINTED WIRING BOARD - 6CH DAMP Board (SHAKE77) (Conductor Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. 6CH DAMP BOARD (SHAKE77) (CONDUCTOR SIDE) Q1018, Q1047, Q1056 C2 E1 E2 C1 CL1211...

  • Page 52: Schematic Diagram - 6Ch Damp Board (Shake77) (1/3)

    HCD-SHAKE33/SHAKE77 6-21. SCHEMATIC DIAGRAM - 6CH DAMP Board (SHAKE77) (1/3) - R1000 6CH DAMP R1001 BOARD 120k R1002 (SHAKE77) R1003 (1/3) Q1003 LTA014EUBFS8TL R1010 C1000 R1004 PROTECTION SWITCH 4.7u 120k CL1035 C1004 C1006 100u 35V C1005 100u 35V R1009 -46V...

  • Page 53: 6Ch Damp Board (Shake77) (2/3)

    HCD-SHAKE33/SHAKE77 6-22. SCHEMATIC DIAGRAM - 6CH DAMP Board (SHAKE77) (2/3) - • See page 71 for IC Block Diagrams. >053S >054S 6CH DAMP BOARD (SHAKE77) (1/3) 6CH DAMP BOARD (SHAKE77) (1/3) (Page 52) (Page 52) 6CH DAMP BOARD C1030 R1052...

  • Page 54: 6Ch Damp Board (Shake77) (3/3)

    HCD-SHAKE33/SHAKE77 6-23. SCHEMATIC DIAGRAM - 6CH DAMP Board (SHAKE77) (3/3) - • See page 71 for IC Block Diagrams. >058S 6CH DAMP BOARD (SHAKE77) (2/3) (Page 53) 6 7 8 9 10 Q1047 6CH DAMP BOARD (3/3) C1320 XP4501 R1391...

  • Page 55: Printed Wiring Board - Str Board (Shake33)

    HCD-SHAKE33/SHAKE77 6-24. PRINTED WIRING BOARD - STR Board (SHAKE33) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. STR BOARD (SHAKE33) S2103 S2102 BLUETOOTH CONNECTION – PAIRING ENTER CL2124 IC2101 D2107 CL2123 S2101 R2103 C2108...

  • Page 56: Schematic Diagram - Str Board (Shake33)

    HCD-SHAKE33/SHAKE77 6-25. SCHEMATIC DIAGRAM - STR Board (SHAKE33) - • See page 71 for IC Block Diagrams. STR BOARD (SHAKE33) S2101 REC TO USB B CL2123 R2101 S2102 ENTER CN2101 CL2124 C2102 CL2101 10u 35V LED +5V R2102 S2103 C2103 LED GND 0.01u...

  • Page 57: Printed Wiring Board - Str Board (Shake77) (Component Side)

    HCD-SHAKE33/SHAKE77 6-26. PRINTED WIRING BOARD - STR Board (SHAKE77) (Component Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. STR BOARD FL BOARD (SHAKE77) (SHAKE77) CN2003 (COMPONENT SIDE) (Page 62) >012P D2100, D2101, D2103, D2109,...

  • Page 58: Printed Wiring Board - Str Board (Shake77) (Conductor Side)

    HCD-SHAKE33/SHAKE77 6-27. PRINTED WIRING BOARD - STR Board (SHAKE77) (Conductor Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. STR BOARD (SHAKE77) (CONDUCTOR SIDE) CL2193 CL2102 CL2103 CL2104 CL2123 CL2121 CL2119 CL2114 CL2111 CL2109...

  • Page 59: Schematic Diagram - Str Board (Shake77)

    HCD-SHAKE33/SHAKE77 6-28. SCHEMATIC DIAGRAM - STR Board (SHAKE77) - • See page 71 for IC Block Diagrams. STR BOARD (SHAKE77) CN2102 CL2121 POWER KEY CL2102 VOL_BLUE2 CL2103 VOL_GREEN2 CL2104 VOL_RED2 CL2105 VOL_BLUE1 CL2106 VOL_GREEN1 CL2107 VOL_RED1 CL2108 VOLUME CL2109 +3.3V >060S...

  • Page 60: Printed Wiring Board - Fl Board (Shake33)

    HCD-SHAKE33/SHAKE77 6-29. PRINTED WIRING BOARD - FL Board (SHAKE33) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. FL BOARD (SHAKE33) >005P ND2001 VACUUM FLUORESCENT DISPLAY MOTHERBOARD BOARD CL2031 CN109 CL2029 (Page 37) CL2027 CN2001...

  • Page 61: Schematic Diagram - Fl Board (Shake33)

    HCD-SHAKE33/SHAKE77 6-30. SCHEMATIC DIAGRAM - FL Board (SHAKE33) - FL BOARD (SHAKE33) ND2001 VACUUM FLUORESCENT DISPLAY CN2002 D2001 IL0353W61B3MKE01 CL2046 LED +5V LEFT WING CL2047 JR2001 LED GND CL2048 LED +5V LED GND CL2050 CL2001 CL2021 LED R-WING CL2051 C2001...

  • Page 62: Printed Wiring Board - Fl Board (Shake77) (Component Side)

    HCD-SHAKE33/SHAKE77 6-31. PRINTED WIRING BOARD - FL Board (SHAKE77) (Component Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. FL BOARD MOTHERBOARD (SHAKE77) BOARD >006P (COMPONENT SIDE) CN109 (Page 37) ND2000 VACUUM FLUORESCENT DISPLAY...

  • Page 63: Printed Wiring Board - Fl Board (Shake77) (Conductor Side)

    HCD-SHAKE33/SHAKE77 6-32. PRINTED WIRING BOARD - FL Board (SHAKE77) (Conductor Side) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. FL BOARD (SHAKE77) (CONDUCTOR SIDE) CL2001 CL2036 CL2023 CL2021 CL2043 CL2042 CL2029 CL2039 CL2035 CL2026...

  • Page 64: Schematic Diagram - Fl Board (Shake77)

    HCD-SHAKE33/SHAKE77 6-33. SCHEMATIC DIAGRAM - FL Board (SHAKE77) - • See page 71 for IC Block Diagrams. FL BOARD (SHAKE77) D2007 D2001 D2006 SMLVN6RGB1U17QYB SMLVN6RGB1U17QYB SMLVN6RGB1U17QYB D2010 SMLVN6RGB1U17QYB D2012 SMLVN6RGB1U17QYB R2030 R2031 R2032 R2033 R2034 R2035 R2036 R2037 R2038 R2040...

  • Page 65: Printed Wiring Board - Mic Board (Shake33)

    HCD-SHAKE33/SHAKE77 6-34. PRINTED WIRING BOARD - MIC Board (SHAKE33) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. MIC BOARD (SHAKE33) CN2203 CN2204 PLAY REC/PLAY CL2239 CL2262 C2203 JR2252 JR2259 C2209 CL2257 C2213 C2208 CL2250...

  • Page 66: Schematic Diagram - Mic Board (Shake33)

    HCD-SHAKE33/SHAKE77 6-35. SCHEMATIC DIAGRAM - MIC Board (SHAKE33) - MIC BOARD (SHAKE33) CN2204 CN2201 >027S CL2207 USB B +5V MOTHERBOARD CL2208 JR2204 CL2209 JR2205 BOARD REC/PLAY (5/8) D- B D+ B CN451 D2211 D2212 C2212 C2213 D2204 D2205 D2206 USB B GND...

  • Page 67: Printed Wiring Board - Mic Board (Shake77)

    HCD-SHAKE33/SHAKE77 6-36. PRINTED WIRING BOARD - MIC Board (SHAKE77) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. MIC BOARD (SHAKE77) (COMPONENT SIDE) J2201 CN2204 CN2205 CN2207 MIC LEVEL REC/PLAY PLAY C2240 CL2262 D2217 CL2263...

  • Page 68: Schematic Diagram - Mic Board (Shake77)

    HCD-SHAKE33/SHAKE77 6-37. SCHEMATIC DIAGRAM - MIC Board (SHAKE77) - MIC BOARD (SHAKE77) CN2204 CN2201 >028S JC011 JC016 CL2214 USB B +5V MOTHERBOARD JR2204 CL2215 CL2216 JR2205 BOARD REC/PLAY (5/8) D- B D+ B CN451 C2229 C2231 D2204 D2205 D2206 D2212...

  • Page 69: 6-38. Printed Wiring Board - Tuner Board

    HCD-SHAKE33/SHAKE77 6-38. PRINTED WIRING BOARD - TUNER Board - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. TUNER BOARD TUNER BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) ANTENNA FM/AM CN3000 D3000 D3002 CL3001 CL3002 CL3003 L3001 R3000...

  • Page 70: 6-39. Schematic Diagram - Tuner Board

    HCD-SHAKE33/SHAKE77 6-39. SCHEMATIC DIAGRAM - TUNER Board - • See page 71 for IC Block Diagrams. TUNER BOARD CL3005 L3004 R3007 3.3 5.5 2.2nH C3005 C3007 C3008 IC3001 X3000 C3004 MM3404A33URE 12MHz 0.0022u C3003 R3003 IC3001 C3013 C3011 CN3001 +3.3V REG.
  • Page 71 HCD-SHAKE33/SHAKE77 • IC Block Diagrams IC1009, IC1011, IC1012, IC1014 IRS2092STRPBF-CU (4CH DAMP BOARD (2/2)) (SHAKE33) IC1004, IC1006, IC1008 IRS2092STRPBF-CU (6CH DAMP BOARD (2/3)) (SHAKE77) IC1015, IC1017, IC1019 IRS2092STRPBF-CU (6CH DAMP BOARD (3/3)) (SHAKE77) FLOATING INPUT DETECT CLICK NOISE ELLIMINATION HIGH...
  • Page 72 HCD-SHAKE33/SHAKE77 IC2000 TC62D723FNG (FL BOARD) (SHAKE77) IC502 TC62D723FNG (MOTHERBOARD BOARD (5/8)) IC2101 TC62D723FNG (STR BOARD) (SHAKE77) IC2102 TC62D723FNG (STR BOARD) (SHAKE33) 25 GND Error detection result SIN 2 Output open/short detection circuit data register circuit 24 VDD SCK 3 TRANS 4...
  • Page 73 HCD-SHAKE33/SHAKE77 IC103 BU4229F-TR (MOTHERBOARD BOARD (7/8)) Vout – Vref IC106 MX25L3235EM2I-10G (MOTHERBOARD BOARD (8/8)) Address Generator Memory Array Page Buffer HOLD Data Register Y-Decoder SRAM Buffer Sense Amplifier Mode State Logic Machine Generator Clock Generator GND 4 Output Buffer IC306 M12L64164A-7TG2Y (MOTHERBOARD BOARD (3/8))
  • Page 74 HCD-SHAKE33/SHAKE77 IC401 AM5890S (MOTHERBOARD BOARD (4/8)) Vcc2 Voltage Detection MUTE Actuator Spindle Driver (6X) Driver (4X) Thermal Shut down Vcc2 Vcc2 Vcc1 Sled Actuator Driver (4X) Driver (6X) Pre-DRV TRAY DRIVER IC451 GL850G-OGY33 (MOTHERBOARD BOARD (5/8)) USPORT RAM ROM FRTIMER...
  • Page 75 HCD-SHAKE33/SHAKE77 IC452 BA2903FV-E2 (MOTHERBOARD BOARD (5/8)) – IC602, IC605 SN74LV4052APWR (MOTHERBOARD BOARD (1/8)) 2-COM 1-COM IC604 PCM1754DBQR (MOTHERBOARD BOARD (1/8)) IC611, IC615 PCM1754DBQR (MOTHERBOARD BOARD (2/8)) SYSTEM SYSTEM CLOCK 16 SCK CLOCK MANAGER AUDIO SERIAL DATA SERIAL CONTROL MUTE PORT...
  • Page 76 HCD-SHAKE33/SHAKE77 IC606 PCM1808PWR (MOTHERBOARD BOARD (1/8)) IC609 PCM1808PWR (MOTHERBOARD BOARD (1/8)) (SHAKE77) LRCK Serial Interface Mode/ MOD0 Format MOD1 Control Clock SCKI Timing Control x1/64 Decimation Filter with High Pass Filter DGND Delta Sigma Delta Sigma Modulator Modulator DVDD Power...
  • Page 77 HCD-SHAKE33/SHAKE77 IC610 SRC4182 (MOTHERBOARD BOARD (1/8)) REFERENCE INTERPOLATION DECIMATION RCKI RE-SAMPLER CLOCK FILTERS FILTERS 28 MODE2 SDIN 27 MODE1 AUDIO BCKI INPUT 26 MODE0 PORT LRCKI RATE ESTIMATOR 25 BCKO AUDIO 24 LRCKO OUTPUT 23 SDOUT PORT DGND 22 VDD...
  • Page 78 HCD-SHAKE33/SHAKE77 • IC Pin Function Descriptions MOTHERBOARD BOARD (8/8) IC101 R7S7200022CFP (SYSTEM CONTROLLER) Pin No. Pin Name Description SRC-RST0 SRC Reset pin VIDEO-MUTE Muting Control for Video CDM-UNLOAD-SW CDM UNLOAD SW CDM-LOAD-SW CDM LOAD SW BT-RESET Reset signal output to Bluetooth section Not used Power supply terminal (+3.3V)
  • Page 79 HCD-SHAKE33/SHAKE77 Pin No. Pin Name Description SSI1_DI Data In Signal from ADC to Aragon PCONT-BTSTBY BT Standby Power Control Pin. “H”: ON PCONT-PSAVE-PRO- Main power on/off control signal output “H”:power on TECT Power supply terminal (+3.3V) LINK-DET Party chain input bias detection pin...
  • Page 80 HCD-SHAKE33/SHAKE77 Pin No. Pin Name Description PVcc Power supply terminal (+3.3V) TEST-MON4/SD_D0_0 Test port for software checking. ANALOG-CSEL/ Multiplexer selector C for Analog input SD_D1_0 RGB-TRANS-LED- Transfer signal to RGB driver (driver for Speaker LED) SPK/SD_WP_0 RGB-TRANS-LED/ Transfer signal to RGB driver...
  • Page 81 HCD-SHAKE33/SHAKE77 Pin No. Pin Name Description Ground terminal MTK-POWER-CTRL Power Control pin for MTK C-CONT Trigger port to start charging of SPM Q-Flash-SIO2 QSPI: Data I/O pins for channel 0 Q-Flash-SIO3 QSPI: Data I/O pins for channel 0 Q-Flash-CLK Clock signal to QSPI...
  • Page 82 HCD-SHAKE33/SHAKE77 MOTHERBOARD BOARD (3/8) IC301 CXD90013R (CD RF AMP FOCUS/TRACKING ERROR AMP CD SYSTEM PROCESSOR DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description RF_C RF main beam (A) input from the optical pick-up block RF_D RF main beam (D) input from the optical pick-up block...
  • Page 83 HCD-SHAKE33/SHAKE77 Pin No. Pin Name Description 57 to 60 RD4 to RD7 Two-way data bus with the SD-RAM DQM0 Data mask signal output to the SD-RAM (lower byte) 62 to 69 RD15 to RD8 Two-way data bus with the SD-RAM...

  • Page 84: Exploded Views

    HCD-SHAKE33/SHAKE77 SECTION 7 EXPLODED VIEWS Note: • The mechanical parts with no reference • Abbreviation The components identifi ed by mark 0 number in the exploded views are not sup- : Australian model or dotted line with mark 0 are critical for plied.

  • Page 85: Back Panel Section

    HCD-SHAKE33/SHAKE77 7-2. BACK PANEL SECTION not supplied not supplied CD MECHANISM (TUNER board) section supplied not supplied supplied not supplied (SHAKE77) MOTHERBOARD board section front panel section Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 86: Fl Board, Str Board

    HCD-SHAKE33/SHAKE77 7-3. FL BOARD, STR BOARD (SHAKE33) not supplied not supplied (STR board) (SHAKE33) EN2101 (SHAKE77) not supplied RV2101 (SHAKE33) front panel section (SHAKE77) not supplied ND2000 (SHAKE77) (SHAKE77) ND2001 (SHAKE33) not supplied (MIC board) (SHAKE77) Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 87: Front Panel Section

    HCD-SHAKE33/SHAKE77 7-4. FRONT PANEL SECTION (SHAKE77) (SHAKE33) not supplied not supplied not supplied (SHAKE77) not supplied not supplied not supplied not supplied (SHAKE33) not supplied Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 88: Motherboard Board Section

    HCD-SHAKE33/SHAKE77 7-5. MOTHERBOARD BOARD SECTION (SHAKE33) (SHAKE77) not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied chassis section Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 89: Chassis Section

    HCD-SHAKE33/SHAKE77 7-6. CHASSIS SECTION (SHAKE33) (SHAKE77) not supplied not supplied not supplied not supplied supplied not supplied not supplied supplied not supplied supplied supplied supplied not supplied supplied supplied supplied supplied supplied not supplied supplied not supplied supplied not supplied...

  • Page 90: Cd Mechanism Section (Cdm90-Dvbu202//M)

    HCD-SHAKE33/SHAKE77 7-7. CD MECHANISM SECTION (CDM90-DVBU202//M) (including MS-476 board) not supplied not supplied not supplied not supplied not supplied not supplied (MS-476 board) supplied Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 91: Electrical Parts List

    HCD-SHAKE33/SHAKE77 SECTION 8 4CH DAMP ELECTRICAL PARTS LIST Note: The components identifi ed by mark 0 • Due to standardization, replacements in • SEMICONDUCTORS or dotted line with mark 0 are critical for the parts list may be different from the In each case, u: —, for example:...
  • Page 92 HCD-SHAKE33/SHAKE77 4CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1236 1-100-153-91 CERAMIC CHIP 220PF 100V C1315 1-100-703-91 CERAMIC CHIP 10uF * C1237 1-100-925-21 CERAMIC CHIP 0.0022uF 250V C1316 1-100-153-91 CERAMIC CHIP 220PF 100V C1238...
  • Page 93 HCD-SHAKE33/SHAKE77 4CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D1002 6-502-970-01 DI DZ2J068M0L Q1028 6-552-698-01 IRF6775MTR1PBF D1003 6-502-968-01 DI DZ2J062M0L Q1030 6-552-698-01 IRF6775MTR1PBF D1004 6-503-026-01 DI DZ2J120M0L Q1031 8-729-013-28 HN1B01FU D1005 6-503-026-01 DI DZ2J120M0L...
  • Page 94 HCD-SHAKE33/SHAKE77 4CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1208 1-216-827-11 METAL CHIP 3.3K 1/10W R1297 1-218-863-11 METAL CHIP 4.7K 0.5% 1/10W R1210 1-216-849-11 METAL CHIP 220K 1/10W R1298 1-216-793-11 METAL CHIP 1/10W R1211...
  • Page 95 HCD-SHAKE33/SHAKE77 4CH DAMP 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1381 1-216-793-11 METAL CHIP 1/10W R1650 1-218-863-11 METAL CHIP 4.7K 0.5% 1/10W R1382 1-218-865-11 METAL CHIP 5.6K 0.5% 1/10W R1651 1-218-863-11 METAL CHIP 4.7K...
  • Page 96 HCD-SHAKE33/SHAKE77 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1012 1-112-800-11 ELECT CHIP 100uF C1105 1-118-118-91 CERAMIC CHIP 0.22uF 100V C1013 1-116-739-11 CERAMIC CHIP 0.47uF C1106 1-118-118-91 CERAMIC CHIP 0.22uF 100V C1014 1-116-739-11 CERAMIC CHIP 0.47uF...
  • Page 97 HCD-SHAKE33/SHAKE77 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * C1341 1-100-925-21 CERAMIC CHIP 0.0022uF 250V C1423 1-118-347-11 CERAMIC CHIP 0.1uF C1342 1-100-761-21 CERAMIC CHIP 0.01uF 250V C1424 1-118-373-11 CERAMIC CHIP 0.01uF C1343 1-100-761-21 CERAMIC CHIP 0.01uF...
  • Page 98 HCD-SHAKE33/SHAKE77 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D1006 6-502-968-01 DI DZ2J062M0L L1027 1-460-713-11 INDUCTOR 20uH D1007 6-503-026-01 DI DZ2J120M0L L1029 1-482-160-21 INDUCTOR 20uH D1008 6-502-970-01 DI DZ2J068M0L D1009 6-500-514-01 DIODE BAV70 < TRANSISTOR >...
  • Page 99 HCD-SHAKE33/SHAKE77 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1024 1-216-817-11 METAL CHIP 1/10W R1110 1-216-827-11 METAL CHIP 3.3K 1/10W R1027 1-216-833-11 METAL CHIP 1/10W R1112 1-216-849-11 METAL CHIP 220K 1/10W R1028 1-216-821-11 METAL CHIP...
  • Page 100 HCD-SHAKE33/SHAKE77 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1390 1-218-863-11 METAL CHIP 4.7K 0.5% 1/10W R1474 1-216-827-11 METAL CHIP 3.3K 1/10W R1391 1-216-864-11 SHORT CHIP R1477 1-216-843-11 METAL CHIP 1/10W R1392 1-216-843-11 METAL CHIP...
  • Page 101 HCD-SHAKE33/SHAKE77 6CH DAMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1542 1-257-604-11 RES-CHIP R1681 1-218-871-11 METAL CHIP 0.5% 1/10W R1546 1-216-791-11 METAL CHIP 1/10W R1682 1-218-865-11 METAL CHIP 5.6K 0.5% 1/10W R1547 1-218-863-11 METAL CHIP 4.7K...
  • Page 102 HCD-SHAKE33/SHAKE77 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C2008 1-118-373-11 CERAMIC CHIP 0.01uF C2040 1-126-933-11 ELECT 100uF (SHAKE33) (SHAKE77) C2008 1-118-345-11 CERAMIC CHIP 0.01uF C2042 1-164-227-11 CERAMIC CHIP 0.022uF (SHAKE77) (SHAKE77) C2009 1-118-345-11 CERAMIC CHIP 0.01uF...
  • Page 103 HCD-SHAKE33/SHAKE77 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR2016 1-216-296-11 SHORT CHIP 0 (SHAKE33) R2016 1-216-823-11 METAL CHIP 1.5K 1/10W JR2017 1-216-296-11 SHORT CHIP 0 (SHAKE33) (SHAKE33) JR2018 1-216-296-11 SHORT CHIP 0 (SHAKE33) R2017 1-218-867-11 METAL CHIP 6.8K...
  • Page 104 HCD-SHAKE33/SHAKE77 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2067 1-216-814-11 METAL CHIP 1/10W S2010 1-762-875-21 SWITCH, TACTILE (TUNER/BAND) (SHAKE33) / (SHAKE77) (AUDIO IN) (SHAKE77) R2068 1-216-815-11 METAL CHIP 1/10W S2011 1-762-875-21 SWITCH, TACTILE (AUDIO IN) (SHAKE33) (SHAKE77) <...
  • Page 105 HCD-SHAKE33/SHAKE77 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C2222 1-124-584-00 ELECT 100uF 6.3V < JUMPER > (SHAKE77) C2224 1-118-345-11 CERAMIC CHIP 0.01uF JC011 1-216-295-91 SHORT CHIP 0 (SHAKE77) (SHAKE77) JC012 1-216-295-91 SHORT CHIP 0 (SHAKE77)
  • Page 106 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2214 1-216-839-11 METAL CHIP 1/10W * C065 1-118-035-11 CERAMIC CHIP 0.1uF (SHAKE77) C066 1-165-492-21 ELECT CHIP 100uF C067 1-165-492-21 ELECT CHIP 100uF R2215 1-216-839-11 METAL CHIP...
  • Page 107 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C149 1-165-492-21 ELECT CHIP 100uF C357 1-118-386-11 CERAMIC CHIP 0.1uF C150 1-165-492-21 ELECT CHIP 100uF C358 1-118-386-11 CERAMIC CHIP 0.1uF * C153 1-118-035-11 CERAMIC CHIP 0.1uF...
  • Page 108 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C533 1-112-692-11 CERAMIC CHIP 1000pF C647 1-164-858-11 CERAMIC CHIP 22PF (SHAKE77) C648 1-118-041-11 CERAMIC CHIP 4.7uF C533 1-118-459-11 CERAMIC CHIP 0.01uF C649 1-118-386-11 CERAMIC CHIP 0.1uF...
  • Page 109 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C724 1-124-779-00 ELECT CHIP 10uF * D104 6-503-578-01 DI RB520SM-30T2R C726 1-128-392-11 ELECT CHIP 470uF 6.3V * D105 6-503-578-01 DI RB520SM-30T2R C737 1-124-779-00 ELECT CHIP 10uF...
  • Page 110 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JACK > < RESISTOR > J602 1-774-411-11 JACK, PIN 6P R002 1-208-911-11 METAL CHIP 0.5% 1/16W (AUDIO OUT L, PARTY CHAIN OUT R, R003 1-208-923-11 METAL CHIP 0.5%...
  • Page 111 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R116 1-218-973-11 METAL CHIP 1/16W R190 1-218-977-11 METAL CHIP 100K 1/16W R117 1-218-965-11 METAL CHIP 1/16W R191 1-218-941-81 METAL CHIP 1/16W R119 1-218-990-81 SHORT CHIP R192...
  • Page 112 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R253 1-218-961-11 METAL CHIP 4.7K 1/16W R323 1-218-953-11 METAL CHIP 1/16W R254 1-218-941-81 METAL CHIP 1/16W R324 1-216-864-11 SHORT CHIP R255 1-218-941-81 METAL CHIP 1/16W R325...
  • Page 113 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R421 1-218-941-81 METAL CHIP 1/16W R562 1-218-937-11 METAL CHIP 1/16W (SHAKE77) R422 1-218-973-11 METAL CHIP 1/16W * R423 1-250-572-11 METAL CHIP 1/10W R569 1-216-864-11 SHORT CHIP...
  • Page 114 HCD-SHAKE33/SHAKE77 MOTHERBOARD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R653 1-250-515-11 METAL CHIP 6.8K 1/16W R720 1-218-929-11 METAL CHIP 1/16W R654 1-218-958-11 METAL CHIP 2.7K 1/16W (SHAKE77) R721 1-218-990-81 SHORT CHIP R655 1-218-965-11 METAL CHIP...
  • Page 115 HCD-SHAKE33/SHAKE77 MOTHERBOARD MS-476 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R818 1-218-965-11 METAL CHIP 1/16W C2102 1-126-791-11 ELECT 10uF (SHAKE33) R819 1-218-929-11 METAL CHIP 1/16W C2102 1-118-345-11 CERAMIC CHIP 0.01uF R820 1-218-929-11 METAL CHIP 1/16W...
  • Page 116 HCD-SHAKE33/SHAKE77 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D2101 6-503-944-51 DI SMLVN6RGB1U17QYB (SHAKE77) JR2174 1-216-296-11 SHORT CHIP 0 (SHAKE33) D2102 6-503-224-02 DI 1L0352V22F3MIT02 (SHAKE77) D2102 6-503-720-11 DI IL0353W61B3MKE01 (SHAKE33) JR2175 1-216-296-11 SHORT CHIP 0 (SHAKE33)
  • Page 117 HCD-SHAKE33/SHAKE77 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2115 1-216-837-11 METAL CHIP 1/10W R2163 1-216-815-11 METAL CHIP 1/10W (SHAKE33) (SHAKE77) R2164 1-216-801-11 METAL CHIP 1/10W R2116 1-216-839-11 METAL CHIP 1/10W (SHAKE77) (SHAKE33) R2165 1-216-801-11 METAL CHIP...
  • Page 118 HCD-SHAKE33/SHAKE77 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark TUNER BOARD 1-828-382-21 WIRE (FLAT TYPE) (23 CORE) 1-492-699-11 BLUETOOTH MODULE ************ 1-828-701-61 WIRE (FLAT TYPE) (10 CORE) < CAPACITOR > 8-989-470-00 RC-S801/A (WW) 1-828-692-61 WIRE (FLAT TYPE) (8 CORE)
  • Page 119 HCD-SHAKE33/SHAKE77 MEMO...
  • Page 120 HCD-SHAKE33/SHAKE77 REVISION HISTORY Ver. Date Description of Revision 2014.01 How to search for a contact point of signal lines or the like in DIAGRAMS SECTION If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use the PDF fi...

This manual is also suitable for:

Hcd-shake77

Table of Contents