Chapter 4: Connecting The Wireless-G Broadband Router With 2 Phone Ports; Overview; Hardware Installation For Connection To Your Broadband Modem; Figure 4-1: Connecting Your Internet Connection - Linksys WRTU54G-TM User Manual

2.4ghz 802.11g wireless-g broadband router with 2 phone ports

Hide thumbs Also See for WRTU54G-TM:

Setup and troubleshooting manual (2 pages)

Firmware upgrade manual (30 pages)

Table Of Contents

100

101

102

103

104

105

106

107

Table of Contents

Wireless-G Broadband Router with 2 Phone Ports

Chapter 4: Connecting the Wireless-G Broadband Router

with 2 Phone Ports

Overview

This chapter includes two sets of connection instructions. If the Wireless-G Broadband Router with 2 Phone Ports

will be the only router in your network, follow the instructions in "Hardware Installation for Connection to Your

Broadband Modem." If you want to install the Wireless-G Broadband Router with 2 Phone Ports behind an existing

router in your network, then follow the instructions in "Hardware Installation for Connection to an existing

Router." Also included are Placement instructions, and SIM Card Installation instructions.

Hardware Installation for Connection to Your Broadband Modem

1. Power down your network devices.

2. Locate an optimum location for the Router. The best place for the Router is usually at the center of your

wireless network, with line of sight to all of your mobile stations.

3. Fix the direction of the antennas. Try to place the Router in a position that will best cover your wireless

network. Normally, the higher you place the antenna, the better the performance will be.

4. Connect a standard Ethernet network cable to the Router's Internet port. Then, connect the other end of the

Ethernet cable to your cable or DSL broadband modem.

Figure 4-1: Connecting Your Internet Connection