Table of Contents
Advertisement
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
characters should then appear properly.
Straight 2 of 5 Industrial (three-bar start/stop)
<Default All Straight 2 of 5 Industrial Settings>
Straight 2 of 5 Industrial On/Off
Straight 2 of 5 Industrial Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 1-48. Minimum Default = 4, Maximum Default = 48.
Minimum Message Length
HF52X Fix Mount Barcode Scanner User Guide
on page 218), and scan the value and the Save bar code
Programming Chart
On
(page 80) for additional information. Minimum and Maximum lengths
on the inside the back cover of this manual. The data
Code 93 Code Page
ISO 2022/ISO 646
* Off
Message Length
Maximum Message Length
93
Advertisement
Table of Contents
