Mitsubishi Electric MELSERVO-J5 User Manual page 109

Ac servo system

Hide thumbs Also See for MELSERVO-J5:

Table of Contents

The following is an example of the servo parameter number PA01 with the setting values of "FEDCBA98" in hexadecimal.

• When setting a servo parameter with one particular digit

[Pr. PA01] =

• When setting a servo parameter using a combination of several digits

[Pr. PA01] =

For example, if the servo parameter name is "Function selection A-1", the setting digit name is "Forced stop deceleration

function selection", and the setting digit is the fourth last digit in PA04, the servo parameter is expressed as shown below.

[Pr. PA04.3 Forced stop deceleration function selection]

PA01.0 = "8"

PA01.1 = "9"

PA01.2 = "A"

PA01.3 = "B"

PA01.4 = "C"

PA01.5 = "D"

PA01.6 = "E"

PA01.7 = "F"

PA01.0-1 = "98"

PA01.2-4 = "CBA"

PA01.5 = "D"

PA01.6 = "E"

PA01.7 = "F"

Forced stop deceleration function

Set "Forced stop deceleration function" to enabled/disabled.

Initial value: 1h (enabled)

3.1 Outline of servo parameter and object dictionary

3 BASIC FUNCTION