hit counter script
Epson TM-P20II Reference Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. TM-P20II
  6. Reference manual
Epson TM-P20II Reference Manual

Epson TM-P20II Reference Manual

Hide thumbs Also See for TM-P20II:
Table of Contents

Advertisement

Quick Links

Download this manual
Web Config Reference Guide
TM-P20II
TM-P80II
TM-m30III
TM-m30III-H
TM-m50II
M00152102
Rev.C

Advertisement

Table of Contents
loading

Related Manuals for Epson TM-P20II

Summary of Contents for Epson TM-P20II

  • Page 1 Web Config Reference Guide TM-P20II TM-P80II TM-m30III TM-m30III-H TM-m50II M00152102 Rev.C...

  • Page 2: Cautions

     Neither is any liability assumed for damages resulting from the use of the information contained herein.  Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

  • Page 3: Using Web Config

    Using Web Config Web Config is a printer's built-in web page that allows you to check and change printer settings on your browser. To use Web Config, you need to set your computer's IP address to the same segment as the printer. How to Start Web Config Start your web browser on a computer or smart device on the network and enter the IP address of the printer in the address field.

  • Page 4: Printers

    HTTPS, a warning will appear in the browser when Web Config is NOTE started. Printers This document covers WebConfig for the following printers.  TM-P20II  TM-P80II  TM-m30III  TM-m30III-H  TM-m50II For more information about the functions of each printer, see Chapter 12, "List of Functions by Model".

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Cautions ..............................................2 Trademarks ............................................... 2 About this Manual ..........................................2 Key to Symbols ........................................... 2 Using Web Config ........................................... 3 How to Start Web Config ........................................ 3 Printers ............................................... 4 TABLE OF CONTENTS ..........................................5 Introduction ............................................ 9 Definitions ........................................
  • Page 6 9.4.2 SSID Setting Page ....................................24 9.4.2.1 Image ........................................ 24 9.4.2.2 Setting Items ....................................24 9.4.2.3 Button ....................................... 24 9.4.3 Result Page ......................................25 9.4.3.1 Image ........................................ 25 9.4.3.2 Setting Result ....................................25 9.4.3.3 Button ....................................... 25 Wi-Fi Direct Page ......................................26 9.5.1 Top Page ........................................
  • Page 7 10.3.2.2 SSID Search Page ..................................58 10.3.2.3 Wi-Fi Settings Page ..................................58 10.3.2.4 Confirm Wi-Fi Setup Page ................................60 10.3.2.5 Result Page ..................................... 61 10.3.3 Wired LAN ........................................ 62 10.3.3.1 Top page ......................................62 10.3.3.2 Confirm page ....................................62 10.3.3.3 Result page .....................................
  • Page 8 11.3 ePOS-Print ........................................163 11.3.1 Image ........................................163 11.3.2 Display Items ......................................163 11.4 ePOS-Device ......................................164 11.4.1 Image ........................................164 11.4.2 Display Items ......................................164 11.5 Server Direct Print ....................................165 11.5.1 Image ........................................165 11.5.2 Display Items ......................................165 11.6 Status Notification ....................................

  • Page 9: Introduction

    1. Introduction This guide is applied to the EPSON Web Config function (hereafter called “Web Config”). Definitions In this guide, words and phrases enclosed in double-quotation marks (“”) are strings that are shown in Web Config. Terminologies Table 1-1 Terminologies...

  • Page 10: Supported Web Browsers

    This section describes the page layout of Web Config. Basic Settings Page 3.1.1 Configuration for Smartphones If the width of the display device is 700px or less, it will be displayed in the configuration for smartphones. EPSON Logo Logoff Icon Product Name Display Area  ...

  • Page 11: Configuration For Pc

    Parts Description EPSON Logo Displays an image of the EPSON Logo. Click the EPSON Logo to access the top page of Web Config. The top page cannot be accessed from the Firmware Update page (except for top page) even if pressed.

  • Page 12: Advanced Settings Page

    Figure 3-1 Layout Table 3-1 Layout Parts Description EPSON Logo Displays an image of the EPSON Logo. Product Name Displays the product name. User Authentication This link allows the user to log on/off. When the user logs on, a page for entering authentication information is displayed.

  • Page 13: Language

    4. Language Supported Languages Table 4-1Supported Languages Languages Japanese / Basic English / French / German / Italian / Spanish / Portuguese Spec of Language Table 4-2 Spec of Language Language Condition English Before language setup on the Web Config Language which is setup on the Web Config After language setup on the Web Config 5.

  • Page 14: Administrator Password Settings

    6. Administrator Password Settings When accessing Web Config, if the administrator password has not been set, go to the Set Administrator Password page. Top Page 6.1.1 Image   Setting Items Button Figure 6-1 Administrator Password Settings 6.1.2 Setting Items The following table shows the items on the page. Table 6-1 Setting Items Items Description...

  • Page 15: User Authentication

    7. User Authentication Authentication Method Web Config uses the administrator user name and password to perform user authentication. This same password is also used for locking the device’s control panel and for EpsonNet Config password authentication. If a password is not configured, administrator rights are granted for all access to Web Config.

  • Page 16: Log On Page

    Log on Page 7.3.1 Image The following figure shows the layout of the logon page. Input Items Button Figure 7-1 Log on Page 7.3.2 Input Items Table 7-3 Input Items Items Description Conditions "Current password" Text box for entering the current password. The entered value is masked with '*'.

  • Page 17: Log On Failure Page

    Log on Failure Page If logon fails, the logon page is displayed with the authentication results. At this time, the password field is left blank. 7.4.1 Image Result Input Items Button 7.4.2 Result Table 7-5 Setting Result Items Description "Incorrect password. " This message is shown when the entered password is incorrect.

  • Page 18: Common Specifications

    8. Common Specifications Password Entry Field The common specifications for password entry fields are shown below.  Entered characters are masked. To use textbox, specify the “password” attribute for “type”.  When a password is set, 10 asterisks (*) are used for the “value” attribute for the textbox. ...

  • Page 19: Basic Settings Page

    9. Basic Settings Page Log on Page 9.1.1 Top Page 9.1.1.1 Image 9.1.1.1.1 Configuration for Smartphones Display Items 9.1.1.1.2 Configuration for PC Display Items  ...

  • Page 20: Display Language Setting

    The language specification is in accordance with section 4, Language. After choosing a language, it is reflected enabled immediately and the page is changed based on the selected language. 9.1.1.3 Network Status Information Only TM-P20II and TM-P80II are displayed. Table 9-1 Network Status Information Items...

  • Page 21: Log On Page

    Log on Page 9.2.1 Image The following figure shows the layout of a log on page. Input Items Button Figure 9-1 Log on Page 9.2.2 Input Items Table 9-2 Input Items Items Description Conditions "Current password" A text box to the input current password. The input value is masked with '*'.

  • Page 22: Log On Failure Page

    Log on Failure Page If log on fails, the log on page of the authentication results is displayed. At this time, the user name is displayed with the previous input value remaining, and the password field is left blank. 9.3.1 Image Result Input Items Button...

  • Page 23: Wi-Fi Page

    Wi-Fi Page 9.4.1 Top Page 9.4.1.1 Image Setting Items Buttons 9.4.1.2 Setting Items Table 9-5 Setting Items Items Description Condition "SSID" Selects the SSID found in the SSID search and the manual option using the radio buttons. 9.4.1.3 Button Table 9-6 Button Items Description Condition...

  • Page 24: Ssid Setting Page

    9.4.2 SSID Setting Page 9.4.2.1 Image Setting Items Buttons 9.4.2.2 Setting Items Table 9-7 Setting Items Items Description Condition "SSID" If selected from a list, the selected SSID is displayed as a fixed string. If manual, use the text box to configure the settings. "Password"...

  • Page 25: Result Page

    9.4.3 Result Page 9.4.3.1 Image Setting Result Figure 9-2 Result Page 9.4.3.2 Setting Result Table 9-9 Setting Result Items Description "Communication is restarting.¥n This text is shown if setup is successful. Restarting communication may take a few minutes. If you want to change the settings, reconnect to the Web Config."...

  • Page 26: Wi-Fi Direct Page

    Wi-Fi Direct Page 9.5.1 Top Page 9.5.1.1 Image Setting Items Buttons 9.5.1.2 Setting Items Table 9-11 Setting Items Items Description Condition "Wi-Fi Direct" Two radio buttons are provided to choose either of the following: "Enable" / "Disable" "The number of connected devices" Displays the number of connected devices with Wi-Fi This item is displayed when Direct.

  • Page 27: Result Page

    9.5.2 Result Page 9.5.2.1 Image Setting Result Figure 9-3 Result Page 9.5.2.2 Setting Result Table 9-13 Setting Result Items Description "Applying the settings.¥n This text is shown if setup is successful. Restarting communication may take a few minutes. If you want to change the settings, restart the Web Config."...

  • Page 28: Print Settings Page

    Print Settings Page 9.6.1 Top Page 9.6.1.1 Image The following figure shows the layout of the top page. Setting Items Button Figure 9-4 Image 9.6.1.2 Setting Items Table 9-15 Setting Items Items Description Condition "Paper Reduction" Use the drop-down list to select from the Displayed only on models following options: that support paper...

  • Page 29: Buttons

    "Print Density" Use the drop-down list to select from the Displayed only on models following options: that support Print Density "70%" / "75%" / "80%" / "85%" / "90%" / "95%" / "100%" / "105%" / "110%" / "115%" / "120%" / "125%" / "130%" "Command execution during offline"...

  • Page 30: Result Page

    9.6.2 Result Page The result message is shown in the main frame after the "OK" button is pressed. 9.6.2.1 Image The following figure shows the layout of the results page. Setting Result Figure 9-5 Image 9.6.2.2 Setting Result Table 9-18 Setting Result Items Description "Restarting...

  • Page 31: Firmware Update Page

    Firmware Update Page 9.7.1 Top Page 9.7.1.1 Image Display Items Description Button Figure 9-6 Top Page 9.7.1.2 Display Items Table 9-20 Display Items Items Description "Current Version" Up to 12 characters in ASCII codes XX.YY.ZZZZZZ -XX: Linux Kernel version -YY: Linux Appli version -ZZZZZZ: Main version 9.7.1.3 Description Table 9-21 Description...

  • Page 32: Firmware Search Process Page

    9.7.2 Firmware Search Process Page The page is shown after the ‘Start’ button is pressed. The following figure shows a layout of the firmware search page. 9.7.2.1 Image Description Button Figure 9-7 Firmware Search Process Page 9.7.2.2 Description Items Table 9-23 Description Items Description "Checking the firmware."...

  • Page 33: Before Update Confirm Page

    Agreement. FOR USERS IN THE UNITED STATES, YOU AGREE TO IMPORTANT LEGAL TERMS AND CONDITIONS, INCLUDING A CLASS ACTION WAIVER AND ARBITRATION. PLEASE READ CAREFULLY: https://support.epson.net/eula/" "Accept" Check box. Check this item to enable the "Start" button. 9.7.3.3 The Information of the Firmware Update...

  • Page 34: Cancel Process Page

    9.7.4 Cancel Process Page 9.7.4.1 Image Description Button Figure 9-9 Cancel Process Page 9.7.4.2 Description Table 9-28 Description Items Description "Canceling the firmware update." Fixed Strings 9.7.4.3 Button Table 9-29 Button Items Description "Refresh" Button on bottom of the main frame. Click to refresh the page.

  • Page 35: Setting Result

    "You have the latest firmware." This message is shown when the current version of the firmware is the most recent. "Cannot connect to the Epson server." This message is shown when the printer could not access the server. The X icon is shown in front of the string.

  • Page 36: Display Or Setting Page

    10. Display or Setting Page 10.1 Status 10.1.1 Product Status 10.1.1.1 Top Page 10.1.1.1.1 Image Display Items Button Figure 10-1 Product Status 10.1.1.1.2 Display items 10.1.1.1.2.1 Display Language Setting The language specification is in accordance with Section 4 Language. When a language is selected, it is applied immediately and the page changes based on the selected language.
  • Page 37 Table 10-3 Hardware Status Items Description "Scanner is out of order. Contact Epson Support. " This message is shown when only Scanner is out of order. An "Panel Snapshot" error code is shown right behind the message. The string is shown in red.
  • Page 38 "Panel Snapshot" string is shown in red. A link to a Panel Snapshot Page is indicated. "Built-in SD card is out of order. Contact Epson Support." This message is shown when only Built-in SD card is out of "Panel Snapshot"...
  • Page 39 "There are problems with x parts of the hardware. This message is shown when there is an abnormality in more (Detail)" than one type of hardware. 'x' indicates the number of failures. "Panel Snapshot" The string is shown in red. This message provides a link to open the Hardware Status page in a separate tab.
  • Page 40 10.1.1.1.2.5 Administrator Information Table 10-7 Administrator Information Items Description "Administrator Name/Contact Information" Shows contact information (name, phone number, etc.) that the user of the printer can use. 10.1.1.1.2.6 Software Licenses Web Config shows this page when the “Software Licenses” link is clicked. License information for OSS that the printer is using is displayed on this page.

  • Page 41: Network Status

    10.1.2 Network Status In the Confirm Network Settings, you can confirm the product’s network settings. 10.1.2.1 Top Page 10.1.2.1.1 Image Display Items Button Figure 10-2 Network Status 10.1.2.1.2 Tab “Network” and “Wi-Fi Direct” tabs are displayed on model that support wireless functions. You can switch between both sets of displayed information.
  • Page 42 "Set using Automatic "Enable" / "Disable" If "Obtain IP Address" is "Manual", this Private IP Addressing" item is not shown. "IP Address" "xxx.xxx.xxx.xxx" Not shown when Connection Status xxx: 0 - 255 in decimal is disabled. "Subnet Mask" "xxx.xxx.xxx.xxx" Not shown when Connection Status xxx: 0 - 255 in decimal is disable.
  • Page 43 Not shown when Connection Status is disable. "Wi-Fi Setup" "AOSS" / "WPS" / "Manual" / "Wi-Fi Auto Connect" / Shown if wireless LAN is used. "Epson iPrint" Not shown when Connection Status is disable. "Wi-Fi Mode" "IEEE802.11b" / "IEEE802.11g" / "IEEE802.11b/g" / Shown if the wireless LAN is used.
  • Page 44 Table 10-10 Display Items (Wi-Fi Direct) Items Description Condition "Device Name" Shows the printer name currently used. "Connection Method" "Not Set"/"Simple AP" "IP Address" "Auto"/"Manual" and IP address are displayed. Shown if "Connection Method" is not The IP address is in the following format: "Not Set"...
  • Page 45 Table 10-11 Display items (Not supporting wireless functions) Items Description Condition "Device Name" Shows the printer name currently used. "Connection Status" "Disconnect" / "10BASE-T, Half Duplex" / "10BASE-T, Shown when the wired LAN is used. Full Duplex" / "100BASE-TX, Half Duplex" / "100BASE-TX, Full Duplex"...
  • Page 46 "Wi-Fi Setup" "AOSS" / "WPS" / "Wi-Fi Direct" / " Manual" / "Wi-Fi Auto Shown if the wireless LAN is used. Connect" / "Epson iPrint" "Wi-Fi Mode" "IEEE802.11b" / "IEEE802.11g" / "IEEE802.11b/g" / Shown if the wireless LAN is used.

  • Page 47: Tm-Intelligent

    10.1.3 TM-Intelligent It is possible to establish a link to TM-i. 10.1.3.1 Top page Click a menu item to open the TM-i Settings page in a new tab. (See "TM-i Settings" for more information.) 10.1.3.1.1 Image Links Figure 10-3 Top page  ...

  • Page 48: Print

    10.2 Print 10.2.1 Print Settings 10.2.1.1 Top Page 10.2.1.1.1 Image The following figure shows the layout of the top page. Setting Items Button Figure 10-4 Image 10.2.1.1.2 Setting Items Table 10-13 Setting Items Items Description Condition "Paper Reduction" Use the drop-down list to select from the Display only on models that following options: support paper reduction...

  • Page 49: Result Page

    "Command execution during offline" User can select "Enable" / "Disable" by Display only on models that radio button. support Command execution during offline "Power saving function for USB" User can select "Enable" / "Disable" by Display only on models that radio button.
  • Page 50 10.2.1.2.1 Image The following figure shows the layout of the results page. Setting Result Figure 10-5 Image 10.2.1.2.2 Setting Result Table 10-16 Setting Result Items Description "Restarting... This message is shown when the settings are completed successfully. Restarting communication may take a few minutes.

  • Page 51: Network

    10.3 Network 10.3.1 Network Basic 10.3.1.1 Top Page 10.3.1.1.1 Image Setting Items Button Figure 10-6 Top Page 10.3.1.1.2 Setting Items The following table shows the network setting items in Wi-Fi/Network Setup. Table 10-17 Setting Items Items Description Condition "Device Name" A text box is provided.
  • Page 52 (APIPA)" "Enable" / "Disable" grayed-out. This item is not displayed on CIJ. "IP Address" A text box is provided. - If "Obtain IP Address" is Format: "xxx.xxx.xxx.xxx" "Auto", this item is grayed-out. "xxx”: "0"~"255" in decimals. The following addresses can not be set. "0.0.0.0"~"0.255.255.255.255"...
  • Page 53 "Proxy Server Setting" "Do Not Use" / "Use" "Proxy Server" Set the proxy server address in the IPv4 address or FQDN - If "Proxy Server Setting" is "Do format. Not Use", this item is grayed-out. "Proxy Server Port Number" A text box is provided. The string must be "0" to "65535" in - If "Proxy Server Setting"...
  • Page 54 "IPv6 Secondary DNS Set this item in the IPv6 address. - If "IPv6 Setting" is "Disable", Server" Use one of the following formats. this item is greyed-out. xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxxx:xxxx "xxxx" indicates one to four digits in Hexadecimal. Repeated "xxxx" in one location of an IPv6 address that are all "0"...

  • Page 55: Confirm Page

    10.3.1.2 Confirm Page 10.3.1.2.1 Image Input Information Button Figure 10-7 Confirm Page 10.3.1.2.2 Input Information Table 10-20 Input Information Items Description "Confirm the following settings." This message is shown at the top of the page, followed by the setting items and their values. "Communication will be shut down temporarily to This message is shown at the bottom of the page.

  • Page 56: Result Page

    10.3.1.3 Result Page The following figure shows the page that is displayed after the network settings are processed. The content of the Result page will vary based on the result (success or failure). 10.3.1.3.1 Image Setting Results Figure 10-8 Result Page 10.3.1.3.2 Setting Result Table 10-22 Setting Result Items...

  • Page 57: Wi-Fi

    10.3.2 Wi-Fi Only models that support wireless LAN are displayed. 10.3.2.1 Top Page 10.3.2.1.1 Image Network Information Button Figure 10-9 Wi-Fi Setup Top Page 10.3.2.1.2 Network Information Display same contents as Network Status of Status tab. 10.3.2.1.3 Button The following buttons are supported. Table 10-23 Button Items Description...

  • Page 58: Ssid Search Page

    10.3.2.2 SSID Search Page 10.3.2.2.1 Image Button Figure 10-10 SSID Search Page 10.3.2.2.2 Button Table 10-24 Button Items Description "Refresh" After the Refresh button is pressed, Web Config goes to the Wi-Fi Settings page if an SSID search has been completed. If an SSID search has not been completed, Web Config remains on the SSID Search page.
  • Page 59 10.3.2.3.2 SSID List You can choose an SSID from the list of searched SSIDs as shown below. A list of up to 15 searched SSIDs (with up to 10 infrastructure mode SSIDs and up to 5 ad hoc mode SSIDs) regardless of coordination mode (Infrastructure or ad hoc) and sorted by signal strength level (strong ->...

  • Page 60: Confirm Wi-Fi Setup Page

    When the “Apply” button is pressed, Web Config displays a pop-up window that shows the following message if it recognizes an error in the entered value. Table 10-30 Error Pop-up Items Description "Invalid value below." This message is shown when the value entered for SSID, Password, or Confirm Password is invalid.

  • Page 61: Result Page

    10.3.2.4.3 Button There is a button to proceed to Wi-Fi Setup based on the values entered on the Confirm Wi-Fi Setup page, and a button to go back to the previous page. Table 10-33 Button Items Description "OK" This button is used to go forward with Wi-Fi Setup based on the values entered on the Confirm Wi-Fi Setup page.

  • Page 62: Wired Lan

    10.3.3 Wired LAN Only models that support wired LAN are displayed. 10.3.3.1 Top page 10.3.3.1.1 Image Setting Items Button Figure 10-14 Top page 10.3.3.1.2 Setting Items The following table shows the setting items in Wired LAN Settings. Table 10-35 Setting Items Items Description Condition...

  • Page 63: Result Page

    10.3.3.2.2 Input Information Table 10-37 Input Information Items Description "Confirm the following settings." This message is shown at the top of the page, followed by the setting items and their values. "Communication will be shut down temporarily This message is shown at the bottom of the page. to enable the new settings.

  • Page 64: Wi-Fi Direct

    10.3.4 Wi-Fi Direct In the Wi-Fi Direct area, you can confirm the information for the Wi-Fi Direct connection and change the settings. Only models that support wireless LAN are displayed. 10.3.4.1 Top Page 10.3.4.1.1 Image Setting Items Wi-Fi Direct Information Button Figure 10-17 Top Page 10.3.4.1.2 Setting Items...
  • Page 65 "IP Address" Two radio buttons are provided to choose one of the If "Wi-Fi Direct" is "Disable", following: this item is grayed out. "Auto" / "Manual" The text box is grayed out if the setting is Auto. When "manual" is selected, a text box for entering an IP address is displayed.

  • Page 66: Confirm Page

    10.3.4.2 Confirm Page 10.3.4.2.1 Image Display Items Button Figure 10-18 Confirm Page 10.3.4.2.2 Display Items The settings that were entered on the previous page are shown for confirmation after the “Change the following settings” message. The following message is shown below the confirmed settings: “Communication will stop temporarily to enable the new settings. You will not be able to access the network immediately after the settings are changed.”...

  • Page 67: Network Security

    10.4 Network Security 10.4.1 Protocol 10.4.1.1 Top Page 10.4.1.1.1 Image Comment Setting Items Button Figure 10-20 Top Page 10.4.1.1.2 Comment Table 10-45 Comment Comment Description "Note: If you need to change the Device Name and Bonjour Name used for each protocol , –Fixed Strings change the Device Name in the Network Settings.
  • Page 68 "iBeacon Settings" Title Only printers that support iBeacon "Enable iBeacon Transmission" Use the check box to choose whether or not to enable Only iBeacon support printers iBeacon . "SLP Settings" Title "Enable SLP" Use the check box to choose whether or not to enable SLP.
  • Page 69 "Printer Name" Use the check box to choose whether or not to allow Only RAW(Port9100) support RAW port printing printer. "Location" Use the edit box to set the timeout for RAW port Only printers that support RAW printing (Port9100) (0 ~ 3600 seconds) Can be entered, when "Allow RAW (Port9100) Printing"...
  • Page 70 "Confirm Password" Same as Password. Same as Password. "Context Name" Use the text box to set the Context Name. Only SNMPv3 support printer. 0 ~ 32 bytes in UTF-8 Can be entered, when "Enable SNMPv3" is checked. "ePOS-Print" Title This item is displayed on devices which have ePOS-Print Lite.

  • Page 71: Confirmation Page

    10.4.1.2 Confirmation Page 10.4.1.2.1 Image Setting Items Button Figure 10-21 Confirmation Page 10.4.1.2.2 Setting Items The settings entered on the previous page are shown for confirmation, after the message “Change the following settings”. The following message is shown below the confirmed settings. “Communication will be shut down temporarily to enable the new settings.”...

  • Page 72: Result Page

    10.4.1.3 Result Page 10.4.1.3.1 Image Setting Result Figure 10-22 Result Page 10.4.1.3.2 Setting Result Table 10-50 Setting Result Items Description "Shutting down." -This message is shown when the settings are "Restarting communication may take a few minutes." completed. "If you want to change the settings, close the Web Config and The network shuts down in order to update.

  • Page 73: Ca Certificate

    10.4.2 CA Certificate 10.4.2.1 Top Page On the CA Certificate top page, you can import, display, and delete CA Certificate. If importing or deleting is successful, this page is shown. The following figure shows the layout of the CA Certificate top page. 10.4.2.1.1 Image The following figure shows the layout of the top page.
  • Page 74 10.4.2.1.4 Button Table 10-53 Button Items Description Condition "Import" Button used to import CA certificate This button is shown when CA Certificate is not imported. "Delete" Button used to delete the imported CA certificate This button is shown when CA Certificate is imported. "Reboot Network"...

  • Page 75: Import Page

    10.4.2.2 Import Page The page is shown after the ‘Import’ button is pressed. The following figure shows the layout of the page for importing the CA certificate into the printer. 10.4.2.2.1 Image Setting Items Note Button Figure 10-24 Import Page 10.4.2.2.2 Setting Items Table 10-56 Setting Items Items...

  • Page 76: Result Page

    10.4.2.3 Result Page After the “Import” button is pressed, the top page is shown in the main frame if importing is successful. After the “Import” button is pressed, the result is shown in the main frame if importing fails. 10.4.2.3.1 Image Setting Result Figure 10-25 Result Page 10.4.2.3.2 Setting Result...

  • Page 77: Root Certificate Update

    10.4.3 Root Certificate Update 10.4.3.1 Top Page The root certificate update function on the Web Config downloads a root certificate file from the server provided by Epson and updates the printer files. 10.4.3.1.1 Image Display Items Button Figure 10-26 Top Page 10.4.3.1.2 Description...

  • Page 78: Progress Page

    10.4.3.2 Progress Page 10.4.3.2.1 Image Button Figure 10-27 Progress Page 10.4.3.2.2 Button Table 10-63 Button Items Description "Refresh" Moves to the results page if the search is completed or remains on the current page if the search has not been completed.
  • Page 79 The root certificate is most recent. " You have the latest root certificate." The printer could not access the server. " Cannot connect to the Epson server." The product is processing. The printer is being configured. " The operation failed."  ...

  • Page 80: Ssl/Tls

    10.4.4 SSL/TLS In the SSL/TLS settings area, you can configure the settings related to the HTTP server the printer supports. Table 10-65 Sub menu Sub menu "Basic" "Certificate" 10.4.4.1 Basic 10.4.4.1.1 Top Page 10.4.4.1.1.1 Image The following figure shows the layout of the top page. Setting Items Button Figure 10-29 Top Page...
  • Page 81 10.4.4.1.2 Confirming Page The confirmation page appears when the “Next” button is pressed on the previous settings page. 10.4.4.1.2.1 Image Setting Items Button Figure 10-30 Confirming Page 10.4.4.1.2.2 Setting Items The settings entered on the previous page are shown for confirmation, after the message “Change the following settings”. The following message is shown below the confirmed settings.
  • Page 82 10.4.4.1.3 Result Page The following result is shown in the main frame after the “OK” button is pressed. 10.4.4.1.3.1 Image Setting Result Figure 10-31 Result Page 10.4.4.1.3.2 Setting Result Table 10-69 Setting Result Items Description "Shutting down." -This message is shown when the settings are completed. "Restarting communication may take a few minutes."...

  • Page 83: Certificate

    10.4.4.2 Certificate 10.4.4.2.1 Top Page 10.4.4.2.1.1 Image The following figure shows the layout of the top page. Button Setting Items Figure 10-32 Top Page 10.4.4.2.1.2 Setting Items You can choose the certificate used for the SSL/TLS connection. Table 10-70 Setting Items Items Description "Server Certificate"...
  • Page 84 "Self-signed Certificate" "Update" - Button for moving to the settings page to update the self-signed certificate If the date and time are not adjusted in the printer, the following message is shown in the main frame. "Invalid Date and Time." "Confirm"...
  • Page 85 "Password" -Enter the passphrase for encryption to create a private key. - Enabled if certificate Usable string: ASCII code (0x20-0x7E) with private key Max of 48 characters. (PKCS#12) selected "CA Certificate 1" -Enter the file of the certificate signed by CA issuing the server - Enabled if certificate certificate to import it into the printer.
  • Page 86 10.4.4.2.3 Confirm for CA-signed Certificate This page is shown after ‘Confirm’ for the import is pressed in the CA-signed certificate settings. The following figure shows the layout of the page for confirming imported certificates. 10.4.4.2.3.1 Confirm Page 10.4.4.2.3.1.1 Image Display Items Button Figure 10-34 Confirm for CA-signed Certificate 10.4.4.2.3.1.2...
  • Page 87 10.4.4.2.4 Generate CSR(Certificate Signing Request) 10.4.4.2.4.1 Generate Top Page This page is shown after ‘Generate’ for importing in the CSR settings is pressed. The following figure shows the layout of the page for generating CSR. 10.4.4.2.4.1.1 Image Setting Items Button Figure 10-35 Generate CSR(Certificate Signing Request) 10.4.4.2.4.1.2 Setting Items...
  • Page 88 10.4.4.2.4.1.3 Button Table 10-78 Button Items Description "OK" - Button for generating CSR at the bottom of the main frame "Back" -Button at the bottom of the main frame for going back to the top page of the certificate settings. When the “Generate”...
  • Page 89 FQDN format. Commas (",")(0x2c) have a special meaning as control characters. See the NOTE below. "Organization" "SEIKO EPSON CORP." -Fixed "Valid Date (UTC)" Shows the date and time for the client "Certificate Validity (year)" Use the drop-down list to select a year for the valid term of the self-signed certificate.
  • Page 90 10.4.4.2.6.2 Confirm Settings Page The confirmation page appears when the self-signed certificate is changed. 10.4.4.2.6.2.1 Image Setting Items Button Figure 10-37 Confirm Settings Page 10.4.4.2.6.2.2 Setting Items The settings entered on the previous page are shown for confirmation, after the message “Change the following settings”. The following message is shown below the confirmed settings.
  • Page 91 10.4.4.2.7 Confirm for the Self-signed Certificate This page is shown after ‘Confirm’ for the import is pressed in the self-signed certificate settings. The following figure shows the layout of the page for confirming certificates. 10.4.4.2.7.1 Confirm Top Page 10.4.4.2.7.1.1 Image Display Items Button Figure 10-38 Confirming Self-signed Certificates...

  • Page 92: Ipsec/Ip Filtering

    10.4.5 IPsec/IP Filtering In the IPsec/IP Filtering settings area, you can configure the settings related to IPsec/IP Filtering. Table 10-88 Sub menu of IPsec Sub menu "Basic" "Client Certificate" 10.4.5.1 Basic You can configure the default policy and group policies for IPsec/IP Filtering in the basic settings. This page consists of a default policy and group policies 1 ~ 10.
  • Page 93 10.4.5.1.1.1.2 Setting Items of Default Policy The following figure shows the layout of this settings area. Table 10-89 Setting Items Items Description Condition "Each policy is applied with Description of the policy following priorities:" "Group Policy 1 > Group Policy 2 > ... > Group Policy 10 >...
  • Page 94 "ID" The values that can be entered depends on the This item is displayed when "IKE selection for "ID Type". [@][#][=] cannot be used as the Version" is "IKEv2" and "ID Type" first character, regardless of the type selected. for "Local" is anything other than "Distinguished Name": ASCII, 1-255 characters.
  • Page 95 "Remote Gateway(Tunnel Enter an IPv4 address or IPv6 address. If "IPsec/IP Filtering" is "Enable" , Mode)" Max of 39 characters. "Access Control" is "IPsec" and "Encapsulation" is "Tunnel Mode" ,it is possible to set this item. "Security Protocol" Use the drop-down list to make a choice. If "IPsec/IP Filtering"...
  • Page 96 "AH" Title strings. "Authentication" is contained. "Authentication" Use the drop-down list to choose from the following.. This item is enabled when Support algorithms refer to the Network Functional "IPsec/IP Filtering" is "Enable", Specifications. "Access Control" is "IPsec" and "SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" / "Security Protocol"...
  • Page 97 -Permit Access or Refuse Access Local Address (Printer/Scanner) Permit Access or Refuse Access IPv4 fe80::~ Except fe80::~ Any * (Specify IP Adress)IPv4   (Specify IP Adress) fe80::~  (Specify IP Adress)fe80::~   Remote Address (Specify IP Adress Range) IPv4 ...
  • Page 98 10.4.5.1.1.2 Group Policy 10.4.5.1.1.2.1 Image The following figure shows the layout of the Setting Items on the Group Policy page. Setting Items Button Figure 10-41 Group Policy of IPsec Basic Top Page 10.4.5.1.1.2.2 Setting Items of Group Policy The following figure shows a layout of this settings area. Table 10-92 Setting Items Items Description...
  • Page 99 "Remote Address(Host)" -Enter up to 43 characters. - If "Enable this Group Policy" is You can enter in the IPv4 and IPv6 formats enabled, this item can be You can enter the empty. configured. It is possible to use the prefix. You can not enter 255.255.255.255 and 0.0.0.0.
  • Page 100 "Remote Port" Enter up to 60 characters. - If "Enable this Group Policy" is Numbers, commas, spaces, and empty strings can be input. enable , "Method of Choosing Enter up to 10 numbers, separated by commas. The range Port" is "Port Number" and is 1-65535.
  • Page 101 "ID Type" Use the drop-down list to make a choice. This item is displayed when "Distinguished Name" / "IP Address" / "FQDN" / "Email "IKE Version" is "IKEv2". Address" / "Key ID" This item is enabled when "Enable this Group Policy" is enabled, "Access Control"...
  • Page 102 "Key Exchange" Use the drop-down list to choose from the following. This item is displayed when "DH Group 1" / "DH Group 2" / "DH Group5" / "DH "IKE Version" is "IKEv1". Group14" / "DH Group15" / "DH Group16" / "DH Group17" / This item is enabled when "DH Group18"...
  • Page 103 10.4.5.1.1.2.3 Button Table 10-93 Button Items Description "Next" If pressed, Web Config goes to the Confirm IPsec Settings page. If Web Config recognizes an error in the entered value after the Next button is pressed, the following error pop-up is shown. Table 10-94 Error Pop-up Items Description...
  • Page 104 10.4.5.1.2 Confirm IPsec Settings Page If the Next button is pressed on the IPsec Group Settings page, Web Config goes to the Confirm IPsec Group Policy Settings page. 10.4.5.1.2.1 Image Input Items Button Figure 10-42 Confirm IPsecDefault Policy Settings Page 10.4.5.1.2.2 Input Information Table 10-95 Input Information...
  • Page 105 <The case of product without LCD panel> This message is shown on the bottom of the page. "If connection is lost unintentionally, initialize the network settings on the product's control panel. And then configure it again." < The case of scanner with LCD panel > "If connection is lost unintentionally, disable IPsec/IP Filtering on the product's control panel.
  • Page 106 10.4.5.1.2.4 Result Page The following figure shows the page that is displayed after the network settings are processed. The content of the Result page will vary based on the result (success or failure). Result Figure 10-43 Success Page Result Figure 10-44 Failed Page 10.4.5.1.2.5 Setting Result Table 10-97 Setting Result...

  • Page 107: Client Certificate

    10.4.5.2 Client Certificate 10.4.5.2.1 Top Page 10.4.5.2.1.1 Image The following figure shows the layout of the top page. Description Button Figure 10-45 Top Page 10.4.5.2.1.2 Description Table 10-98 Description Items Description "On the following page, configure the settings Fixed Strings on the CA certificate to verify peer certificates."...
  • Page 108 10.4.5.2.1.4 Button The following table shows the buttons on the page. Table 10-100 Button Items (Group Name) Items (Button Name) Description Condition "Client Certificate" "Import" - Button for importing Client certificate "Confirm" - Button for confirming the imported Client -Client certificate certificate imported "Delete"...
  • Page 109 10.4.5.2.3 Importing for Client Certificate 10.4.5.2.3.1 Import Top Page This page is shown after the ‘Import’ button in the Client certificate settings is pressed. The following figure shows the layout of the page for importing the Client certificate into the printer. 10.4.5.2.3.1.1 Image Setting Items...
  • Page 110 10.4.5.2.3.1.4 Button The following table shows the buttons on the page. Table 10-104 Button Items Description "OK" Button at the bottom of the main frame to perform importing. After the "OK" button is pressed, Web Config performs the following operations depending on conditions.
  • Page 111 "Invalid file." This message is shown in the following cases. - The file uses an incorrect format or wrong interrelation. - The file size is greater than the stipulated range of 5k to 24k. (See the note.) - The private key and certificate do not match.
  • Page 112 10.4.5.2.4 Confirm for Client certificate 10.4.5.2.4.1 Top Page This page is shown after ‘Confirm’ for the import is pressed in the Client certificate settings. The format of the indicated page is the same as “Confirm for CA-signed certificate”. 10.4.5.2.4.1.1 Display Items Table 10-107 Display Items Items Description...
  • Page 113 10.4.5.2.5 Generate CSR(Certificate Signing Request) 10.4.5.2.5.1 Generate Top Page This page is shown after ‘Generate’ for importing in the CSR settings is pressed. The format of the indicated page is the same as “SSL/TLS > Certificate> Generate CSR”. 10.4.5.2.5.1.1 Image Setting Items Button Figure 10-49 Generate CSR(Certificate Signing Request)
  • Page 114 10.4.5.2.5.1.3 Button When the “Generate” button is pressed, Web Config displays a pop-up window with the following message if it recognizes an error in the entered value. Table 10-110 Button Items Description "OK" Button for generating CSR at the bottom of the main frame. "Back"...

  • Page 115: Ieee802.1X

    10.4.6 IEEE802.1X In the IEEE802.1X settings area, you can configure the settings related to the HTTP server the printer supports. Table 10-113 Sub menu Sub menu "Basic" "Client Certificate" 10.4.6.1 Basic 10.4.6.1.1 Top Page in Basic Settings 10.4.6.1.1.1 Image The following figure shows the layout of the settings for IEEE802.1X basic. Setting Items Button Figure 10-51 IEEE802.1X Top Page in Basic Settings...
  • Page 116 "Password" A text box is provided. The string must be from 1 - Not equipped with Wi-Fi chip to 128 bytes with characters in ASCII codes. (0x20 Can be entered by the user when "EAP - 0x7E) Type" is "PEAP/MSCHAPv2" If "EAP Type"...
  • Page 117 10.4.6.1.2 SSID Search Page When the “Wi-Fi Setup” button is pressed, Web Config goes to the SSID Search page as shown below. If Web Config confirms periodically that an SSID search has been triggered by access to this page or by pressing the Refresh button, it goes to the Wi-Fi Settings page.
  • Page 118 10.4.6.1.3.2 SSID List Choose an SSID from the list of searched SSIDs as shown below. A list of up to 10 searched SSIDs (only WPA2/WPA3-Enterprise SSIDs) is sorted by signal strength level (strong -> weak). Table 10-118 SSID List Items Description Condition "SSID"...
  • Page 119 10.4.6.1.4 Confirm IEEE802.1X Settings Page If the Next button is pressed on the IEEE802.1X Top page or Wi-Fi Settings page, Web Config goes to the Confirm IEEE802.1X Settings page. 10.4.6.1.4.1 Image Input Information Button Figure 10-54 Confirm IEEE802.1X Settings Page 10.4.6.1.4.2 Input Information The display items for entered information are changed from the top page or the Wi-Fi settings page.
  • Page 120 <The case of product without LCD panel> This message is shown at the bottom of the - Only from top page "If connection is lost unintentionally, initialize page. the network settings on the product's control panel. And then configure it again." <The case of scanner with LCD panel>...

  • Page 121: Client Certificate

    10.4.6.2 Client Certificate 10.4.6.2.1 Top Page The following figure shows the layout of the top page for certificate settings. The format of the indicated page is the same as “IPsec/IP Filtering > Importing for Client certificate”. Description Button Figure 10-56 Top Page 10.4.6.2.1.1 Description Items Table 10-127 Description Items...
  • Page 122 10.4.6.2.1.3 Button The following table shows the buttons on the page. Table 10-129 Button Items (Group Name) Items (Button Name) Description Condition "Client Certificate" "Import" Button for importing Client certificate "Confirm" Button for confirming the imported Client Client certificate certificate imported.
  • Page 123 10.4.6.2.3 Importing for Client Certificate 10.4.6.2.3.1 Import Top Page This page is shown after the ‘Import’ button in the Client certificate settings is pressed. The format of the indicated page is the same as “IPsec/IP Filtering > Importing for Client certificate”. 10.4.6.2.3.1.1 Setting Items On the Import Top Page, the following items can be controlled by the administrator.
  • Page 124 10.4.6.2.3.2 Error Pop-up Window If the “OK” button is pressed, the error pop-up window is shown if the entered value is invalid. The format of the indicated page is the same as “IPsec/IP Filtering > Importing for Client certificate”. 10.4.6.2.3.2.1 Confirmation Message Table 10-134 Error Pop-up Window Items...
  • Page 125 10.4.6.2.3.4 Result Page The following result is shown in the main frame after the “OK” button is pressed. The format of the indicated page is the same as “IPsec/IP Filtering > Importing for Client certificate”. 10.4.6.2.3.4.1 Result Table 10-138 Result Items Description Redirect...
  • Page 126 10.4.6.2.4 Confirm for Client Certificate This page is shown after ‘Confirm’ for the import is pressed in the Client certificate settings. The format of the indicated page is the same as “IPsec/IP Filtering > Confirm for Client certificate”. 10.4.6.2.4.1 Display Items Table 10-140 Display Items Items Description...
  • Page 127 10.4.6.2.6 Copying and Overwriting a Client Certificate 10.4.6.2.6.1 Warning Pop-up Window A pop-up window is shown when the ‘Copy’ is pressed if the Client Certificate was imported with this function. The format of the indicated page is the same as “Importing for CA-signed certificate”. 10.4.6.2.6.1.1 Confirmation Message Table 10-143 Warning Pop-up Window...
  • Page 128 10.4.6.2.7 Generate CSR(Certificate Signing Request) 10.4.6.2.7.1 Generate Top Page This page is shown after ‘Generate’ for importing in the CSR settings is pressed. The format of the indicated page is the same as “SSL/TLS > Certificate> Generate CSR”. 10.4.6.2.7.1.1 Setting Items The user must enter the following information to generate CSR.
  • Page 129 10.4.6.2.7.1.3 Result Page After the Generate CSR button is pressed, Web Config goes to the Result page. Table 10-149 Setting Result Items Description "Setup complete." This message is shown when the settings are completed. "Setup failed." This message is shown if the settings fail. 10.4.6.2.8 Download CSR(Certificate Signing Request) This page is shown after ‘Download’...

  • Page 130: Product Security

    10.5 Product Security 10.5.1 Password Encryption 10.5.1.1 Top Page 10.5.1.1.1 Image Setting Items Button Figure 10-59 Password Encryption 10.5.1.1.2 Setting Items The following table shows the item on the page. Table 10-150 Setting Items Items Description Condition "Password Encryption" Two radio buttons are provided to choose either of the Display only on software followings: encryption models.

  • Page 131: Result Page

    10.5.1.2 Result Page The result message is shown on the main frame after “OK” button is pressed. 10.5.1.2.1 Image Setting Result Figure 10-60 Result Page 10.5.1.2.2 Setting Result Table 10-153 Result Page Items Description "Setup complete." This message is shown when the settings are completed successfully. "Setup failed."...

  • Page 132: Change Administrator Password

    10.5.2 Change Administrator Password In this area, the user can change the authentication information for an administrator. The settings that are configured by the user in this area are used when an administrator logs on. 10.5.2.1 Top Page 10.5.2.1.1 Image Setting Items Button Figure 10-61 Change Administrator Password...

  • Page 133: Result Page

    10.5.2.1.3 Button The following table shows the buttons on the page. Table 10-155 Button Items Description Condition "OK" Button at the bottom of the page "Restore Default Settings" If pressed, Web Config restores the Displayed only on models that setting values to the factory defaults. support the initial value for the administrator password.

  • Page 134: Device Management

    10.6 Device Management 10.6.1 Export and Import Setting Value On the Setting Export and Import page, the user can export Web Config advanced settings to a file, and import those settings from a configuration file. Table 10-158 Sub menu of Export/Import Sub menu "Export"...

  • Page 135: Export

    10.6.1.2 Export The Export page consists of a Top page and a Result page. 10.6.1.2.1 Top Page 10.6.1.2.1.1 Image When “Export” is chosen in the menu frame, the top page for export is displayed as shown below. Comment Category Select Device Unique Setting Password enter Button...
  • Page 136 10.6.1.2.1.3 Category Select This item is for checking the export categories. Selectable categories are shown in “Export/Import Category”. No categories are selected at first. The following table shows the features of each export category. Table 10-161 Features of Export Categories Categories Feature Device Name...
  • Page 137 10.6.1.2.1.6 Button The following table shows the buttons on the page. Table 10-164 Button Items Description "Export" If pressed, the printer starts to create an export file. If file creation fails, Web Config goes to the Result page. After it is pressed, all items on the top page are grayed-out.

  • Page 138: Import

    10.6.1.3 Import The Import page consists of a Top page, Category Select page, Confirmation page, and Result page. 10.6.1.3.1 Top Page 10.6.1.3.1.1 Image When “Import” is chosen in the menu frame, the top page is displayed as shown below. Comment Setting Items Button Figure 10-64 Top Page...
  • Page 139 10.6.1.3.1.4 Button The following table shows the buttons on the page. Table 10-169 Button Items Description Condition "Next" If pressed, the Web Config makes transition to the This button is enabled only when Category Select page.If file analysis is failed, the an import file is selected.
  • Page 140 10.6.1.3.2.3 Category Select No categories are selected at first. The following table shows the features of each import category Table 10-172 Features of Import Categories. Category Feature All Categories The check box is enabled only when the import file includes settings. "!"...
  • Page 141 This message is shown when the category is not checked. End User License Agreement. FOR USERS IN THE UNITED STATES, YOU AGREE TO IMPORTANT LEGAL TERMS AND CONDITIONS, INCLUDING A CLASS ACTION WAIVER AND ARBITRATION. PLEASE READ CAREFULLY:https://support.epson.net/eula/ Agree? "  ...
  • Page 142 10.6.1.3.3 Confirmation Page 10.6.1.3.3.1 Image The page is shown when “Next” on the previous page is pressed. Comment Category Select Button Figure 10-66 Confirmation Page 10.6.1.3.3.2 Comment The following table shows the layout for comments. Table 10-177 Comment Comment Description Condition "The symbols indicate as follows: "...
  • Page 143 10.6.1.3.4 Result Page 10.6.1.3.4.1 Result The content of the Result page will vary based on the result. Table 10-179 Result Items Description Condition "Shutting down. " This message is shown when the Displayed when "Print Settings" is "Restarting communication may take a settings are completed.

  • Page 144: Firmware Update

    10.6.2 Firmware Update 10.6.2.1 Top Page 10.6.2.1.1 Image Display Items Description Button Figure 10-67 Top Page 10.6.2.1.2 Display Items Table 10-180 Display Items Items Description "Current Version" Up to 12 characters in ASCII codes XX.YY.ZZZZZZ -XX: Linux Kernel version -YY: Linux Appli version -ZZZZZZ: Main version 10.6.2.1.3 Description Table 10-181 Description...

  • Page 145: Firmware Search Process Page

    10.6.2.2 Firmware Search Process Page The page is shown after the ‘Start’ button is pressed. The following figure shows a layout of the Firmware search process page. 10.6.2.2.1 Image Description Button Figure 10-68 Firmware Search Process Page 10.6.2.2.2 Description Items Table 10-183 Description Items Description...

  • Page 146: Before Update Confirm Page

    EULA Agreement. FOR USERS IN THE UNITED STATES, YOU AGREE TO IMPORTANT LEGAL TERMS AND CONDITIONS, INCLUDING A CLASS ACTION WAIVER AND ARBITRATION. PLEASE READ CAREFULLY: https://support.epson.net/eula/" "Accept" Check box. When this item is checked then "Start" button is enable.

  • Page 147: Cancel Process Page

    10.6.2.3.4 Button Table 10-187 Button Items Description "Cancel" If you click, Firmware update is canceled. "Start" If you click, Firmware update is started. 10.6.2.4 Cancel Process Page 10.6.2.4.1 Image Description Button Figure 10-70 Cancel Process Page 10.6.2.4.2 Description Table 10-188 Description Items Description "Canceling the firmware update."...

  • Page 148: Result Page

    "You have the latest firmware." This message is shown when the current version of the firmware is latest. "Cannot connect to the Epson server." This message is shown when the printer could not access to the server. The X icon is shown in front of the string.

  • Page 149: Administrator Name/Contact Information

    10.6.3 Administrator Name / Contact Information In this area, the user can set the contact information for the administrator. 10.6.3.1 Top Page 10.6.3.1.1 Image Setting Items Button Figure 10-72 Contact Information Settings 10.6.3.1.2 Setting Items The following table shows the items on the page.. Table 10-191 Setting Items Items Description...

  • Page 150: Date And Time

    10.6.4 Date and Time In the settings area, you can set the date and time supported by the printer. You can also change the settings related to the NTP server. Table 10-194 Sub menu of Date and Time Sub menu Condition "Display Format"...
  • Page 151 10.6.4.1.2 Result Page The result message is shown in the main frame after the “OK” button is pressed. 10.6.4.1.2.1 Image Results Figure 10-74 Result Page 10.6.4.1.2.2 Result Table 10-197 Results Items Description "Setup complete" This message is shown when the settings are completed. "Setup failed"...

  • Page 152: Date And Time

    10.6.4.2 Date and Time 10.6.4.2.1 Top Page 10.6.4.2.1.1 Image Setting Items Button Figure 10-75 Date and Time settings 10.6.4.2.1.2 Setting Items The following table shows the items on the page. Table 10-198 Setting Items Items Description Condition "Year" Text box for entering a year. Four digits. (20XX-2099). XX: Indicates the product's launch year.
  • Page 153 10.6.4.2.2 Result Page The following result is shown in the main frame after the “OK” button is pressed. 10.6.4.2.2.1 Image Result Figure 10-76 Result Page 10.6.4.2.2.2 Result Result is below. Table 10-201 Result Items Description Condition "Setup complete" This message is shown when the settings are completed. "Setup failed"...

  • Page 154: Time Difference

    10.6.4.3 Time Difference 10.6.4.3.1 Top Page 10.6.4.3.1.1 Image The following figure shows the layout of this settings area. Setting Items Button Figure 10-77 Time Difference 10.6.4.3.1.2 Setting Items The following table shows the items on the page. Table 10-202 Setting Items Items Description "Daylight Saving Time"...
  • Page 155 10.6.4.3.2 Result Page The result message is shown in the main frame after the “OK” button is pressed. 10.6.4.3.2.1 Image Result Figure 10-78 Result Page 10.6.4.3.2.2 Result Table 10-204 Results Items Description "Setup complete" This message is shown when the settings are completed. "Setup failed"...

  • Page 156: Time Server

    10.6.4.4 Time Server 10.6.4.4.1 Models that Support Node.js 10.6.4.4.1.1 Top Page 10.6.4.4.1.1.1 Image The following figure shows the layout of this settings area. Setting Items Button Figure 10-79 Time Server Settings 10.6.4.4.1.1.2 Setting Items The following table shows the items on the page. Table 10-205 Time Sever Settings Items Description...
  • Page 157 10.6.4.4.2 Progress Page The progress page indicating a sandglass is shown in the beginning when the Start button is pressed. On the progress page, the Web Config checks to see if the Refresh button is pressed and if the setup is completed periodically and makes transition to the Results page if the setup is completed or remains the current page if the setup has not been completed.
  • Page 158 10.6.4.4.3 Result Page As soon as the result is determined, the following result message is shown in the main frame. 10.6.4.4.3.1 Image Result Figure 10-81 Result Page 10.6.4.4.3.2 Setting Result The result is shown below. Table 10-209 Result Items Description Condition "Setup complete"...
  • Page 159 10.6.4.4.4 Models that Do Not Support Node.js 10.6.4.4.4.1 Top Page 10.6.4.4.4.1.1 Image The following figure shows a layout of this settings area. Setting Items Button Figure 10-82 Time Server Settings 10.6.4.4.4.1.2 Setting Items The following table shows the items on the page. Table 10-210 Time Sever Settings Items Description...
  • Page 160 10.6.4.4.4.2 Result Page 10.6.4.4.4.2.1 Image Result Figure 10-83 Result Page 10.6.4.4.4.2.2 Setting Result Results are shown below. Table 10-213 Result Items Description Condition "Setup complete" This message is shown when the settings are completed. "Setup failed" This message is shown when the settings fail. "Cannot access the product until This message is shown when the setting is processing is complete."...

  • Page 161: Tm-I Settings

    11. TM-i Settings 11.1 Basic Displays basic information about TM-i. 11.1.1 Image Figure 11-1 Basic 11.1.2 Display Items Table 11-1 Display Items Items Description Model Displays the model name. Serial Number Displays the serial number. TM-i Firmware Version Displays version information for TM-i. Spec Displays the destination.

  • Page 162: Printer

    11.2 Printer 11.2.1 Image Figure 11-2 Printer 11.2.2 Display Items Table 11-2 Display Items Items Description Printer List Displays a list of registered printers. The field for adding a new printer is shown in the bottom row. Device ID Displays the ID of the registered device. - Available characters: "A"...

  • Page 163: Epos-Print

    11.3 ePOS-Print 11.3.1 Image Figure 11-3 ePOS-Print 11.3.2 Display Items Table 11-3 Display Items Items Description ePOS-Print Displays the ePOS-Print enable/disable settings. Note Displays any notes.  ...

  • Page 164: Epos-Device

    11.4 ePOS-Device 11.4.1 Image Figure 11-4 ePOS-Device 11.4.2 Display Items Table 11-4 Display Items Items Description ePOS-Device Displays the ePOS-Device enable/disable settings. Note Displays any notes.  ...

  • Page 165: Server Direct Print

    11.5 Server Direct Print 11.5.1 Image Figure 11-5 Server Direct Print 11.5.2 Display Items Table 11-5 Display Items Items Description Server Direct Print Displays the server direct settings. Server1 Displays the first server. Server2 Displays the second server. Server3 Displays the third server. Displays the URL of the server to be accessed.

  • Page 166: Status Notification

    11.6 Status Notification 11.6.1 Image Figure 11-6 Status Notification 11.6.2 Display Items Table 11-6 Display Items Items Description Status Notification Displays the status notification settings. Displays the URL of the server to be accessed. Interval(s) Displays the interval for attempting access, in seconds. Displays the ID used for server authentication.

  • Page 167: Proxy

    11.7 Proxy 11.7.1 Image Figure 11-7 Proxy 11.7.2 Display Items Table 11-7 Display Items Items Description Proxy Displays the proxy settings. Displays the URL of the proxy server. Port Displays the port of the proxy server. Displays the ID used for proxy authentication. Password Displays the password used for proxy authentication.

  • Page 168: Reset

    11.8 Reset 11.8.1 Image Figure 11-8 Reset 11.8.2 Display Items Table 11-8 Display Items Items Description Restore Default Settings Click this button to restore the factory default settings.  ...

  • Page 169: Help

    11.9 Help 11.9.1 Image Figure 11-9 Basic 11.9.2 Display Items Table 11-9 Display Items Items Description Input limit Explanation of limitations on characters that can be used. URL field Displays a description of the input limitations for URL. "Must start with [http(s)://] and not exceed 2043 characters." ID field Displays a description of the input limitations for ID.

  • Page 170: List Of Functions By Model

    12. List of Functions by Model Models TM-m30III, TM-P20II, Functions TM-m30III-H, TM-P80II Display TM-m50II Status Always displayed   Product Status Always displayed   Network Status Always displayed   TM-Intelligent Always displayed  Print Always displayed  ...

This manual is also suitable for:

Tm-p80iiTm-m30iiiTm-m30iii-hTm-m50ii

Table of Contents