Table of Contents
Advertisement
Brightness Adjustment Of The
Display
1
Set the Power Switch
to "M" or "PLAY" while
pressing down the Lock
Button located on the
switch.
2
Open the LCD monitor
fully. (
pg. 19)
● To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
"PRIORITY" to "FINDER"
(
pg. 37, 40).
3
Press MENU. The
Menu Screen appears.
4
Press
or
to select "n", and press SET.
The CAMERA DISPLAY Menu appears.
5
Press
or
to select "BRIGHT", and press
SET. The Menu Screen closes and the
brightness control indicator appears.
6
Press < or > until the appropriate brightness
is reached.
7
Press MENU to clear the brightness control
indicator from the display.
Tripod Mounting
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
● Some tripods are not
equipped with studs.
MENU
<
SET
>
BRIGHT
GETTING STARTED
Loading/Unloading A Cassette
The camcorder needs to be powered up to load
or eject a cassette.
PUSH HERE
OPEN/EJECT
Erase
protection tab
Make sure the window
side is facing out.
1
Slide and hold OPEN/EJECT in the direction
of the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically.
● Do not touch internal components.
2
Insert or remove a tape and press "PUSH
HERE" to close the cassette holder.
● Be sure to press only the section labelled "PUSH
HERE" to close the cassette holder; touching
other parts may cause your finger to get caught in
the cassette holder, resulting in injury or product
damage.
● Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
● When the battery pack's charge is low, you may
not be able to close the cassette holder cover. Do
not apply force. Replace the battery pack with a
fully charged one or use AC power before
continuing.
3
Close the cassette holder cover firmly until it
locks into place.
To protect valuable recordings
Slide the erase protection tab on the back of the
tape in the direction of "SAVE". This prevents the
tape from being recorded over. To record on this
tape, slide the tab back to "REC" before loading
it.
EN
Cassette holder cover
Cassette holder
CONTINUED ON NEXT PAGE
17
- Quick Links:
- Power
- Loading/Unloading a Cassette
Hide quick links:
Advertisement
Table of Contents
