Page 2
Welcome! Thank you for purchasing the Sony Cassette Car Stereo. This unit lets you enjoy a variety of features by using an optional rotary commander.
Table of contents Getting Started Additional Information Precautions ............9 Resetting the unit ..........4 Detaching the front panel ........4 Maintenance ............10 Dismounting the unit ........11 Setting the clock ..........5 The rotary commander labels ......11 Cassette Player Location of controls ..........
Attaching the front panel Attach part A of the front panel to part B of Getting Started the unit as illustrated and push until it clicks. Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit.
Setting the clock Cassette Player The clock has a 12-hour digital indication. For example, setting it to 10:08 Press (OFF) or (DSPL) during operation. Listening to a tape Press (DSPL) for two seconds. Insert a cassette. The hour digit flashes. 1 Set the hour digits.
Locating the beginning of a track Switching to the radio while fast- — Automatic Music Sensor (AMS) winding a tape — Automatic Tuner Activation (ATA) You can skip up to nine tracks at one time. Press (5) during playback. During playback, press either side of “ATA”...
Memorizing only the Radio desired stations Up to 6 stations on each band (FM1, FM2, FM3, MW, SW1 and SW2) can be stored on the Memorizing stations preset number buttons in the order of your choice. Therefore, 18 FM stations can be automatically memorized.
Changing the displayed items Each time you press (DSPL), the display Other Functions changes between the frequency and the clock. If you cannot tune in a preset station Adjusting the sound Press either side of (SEEK/AMS) momentarily to search for the station characteristics (automatic tuning).
If you have any questions or problems To obtain the beep tone again, press these concerning your unit that are not covered in buttons again. this manual, please consult your nearest Sony dealer. Note If you connect an optional power amplifier to the LINE...
In such a case, • Slack in the tape may cause the tape to be consult your nearest Sony dealer. caught in the machine. Before you insert the tape, use a pencil or similar object to turn the reel and take up any slack.
Dismounting the unit The rotary commander labels You can control this unit with the optional rotary commander (RM-X4S). Some labels are supplied with the rotary commander. Attach that label that matches the functions of the master unit and the mounting Release key (supplied) position of the rotary commander.
Specifications Cassette player section General Tape track 4-track 2-channel stereo Outputs Power antenna control Wow and flutter 0.08 % (WRMS) lead/Power amplifier Frequency response 30 – 18,000 Hz control lead/Telephone ATT control lead Signal-to-noise ratio 58 dB Rear line out (1) Bass ±8 dB at 100 Hz Tone controls Tuner section...
Preset tuning is not possible. • The broadcast is too weak. Automatic tuning is not possible. The broadcast is too weak. n Use manual tuning. If the above-mentioned solutions do not help to improve the situation, consult your nearest Sony dealer.
Index R, S ATT 8 Radio 7 Automatic Music Sensor (AMS) 6 Repeat play 6 Automatic tuning 8 Reset 4 Automatic Tuner Activation (ATA) 6 Rewind 5 Rotary commander 11 T, U, V, W, X, Y, Z BAL (left-right) 8 BAS (bass) 8 Tape playback 5 Best Tuning Memory (BTM) 7...
Page 16
Sony Corporation Printed in South Africa...