Siemens SIMATIC IPC277G PRO Operating Instructions Manual page 33

Hide thumbs Also See for SIMATIC IPC277G PRO:

Table of Contents

Procedure for mounting

The following description shows an example of how to attach the PRO device to a support

arm system using the optionally available Siemens flange mount ⑦. Mounting to a 48.3 mm

round tube ⑧ that fits the opening of the PRO device is performed in a similar fashion.

NOTICE

Observe the torques

If you apply too much torque to tighten the screws of the backplane cover and the terminal

compartment cover or the screws for fastening the device to a support arm or pedestal, the

threads of the enclosure, intermediate plate or support arm may be damaged.

If you tighten the screws with a torque that is too low, the device is not sealed.

1. Remove the screws ⑤ of the terminal compartment cover.

2. Open the terminal compartment cover and set it aside safely.

⑤

⑥

⑦

⑧

⑨

SIMATIC IPC277G PRO

Operating Instructions, 02/2022, A5E51373692-AA

Screws for terminal compartment cover

Setscrews

Flange mount (not included in the product package; see System components (Page 14))

Third-party round tube (∅ 48 mm)

Cover plate (Included in the product package; see Accessory kit (Page 14))

Installing and connecting the device

3.3 Mounting the device

Table of Contents