Table of Contents
Advertisement
Controller Priority Function
Hot water supplied from this appliance is delivered to the kitchen, washroom, and shower, etc. at the
same temperature.
The water temperature can only be changed by one remote controller if a number of remote controllers
are installed.
Only the controller with the priority light illuminated will be able to adjust the temperature of the water
heater.
• The remote controller on which the operation button is turned "on" has priority.
• If the Bathroom or Sub controller has priority left ON, press OFF & ON any other controller to transfer
priority to that controller. This function cannot be changed while the appliance is producing hot water
(Except when hot water is operating).
When the temperature cannot be adjusted, follow the procedure below. <Priority button>
Temperature cannot be adjusted
Off
Off
Off
18
Operating Instructions
Priority
Switch priority
Press the priority button
Turn off the
Turn on the operation
operation button.
button once again.
Off
* Care must be taken as operation is interrupted.
Turn off the
Turn on the operation
operation button.
button once again.
* Care must be taken as operation is interrupted.
(Temperature settings for example.)
Temperature can be adjusted
On
On
On
On
Advertisement
Table of Contents
