Chapter 2. Installing Options; Installation Guidelines - IBM System x3850 Installation Manual
Hide thumbs
Also See for System x3850:
- Configuration and options manual (548 pages) ,
- Service manual (192 pages) ,
- User manual (100 pages)
Table of Contents
Advertisement
Chapter 2. Installing options
This chapter provides basic instructions for installing hardware options in the server.
These instructions are intended for users who are experienced with setting up IBM
server hardware. If you need more detailed instructions, see the User's Guide on
the IBM System x Documentation CD.
Installation guidelines
Before you begin installing options, read the following information:
v Read the safety information that begins on page v, the guidelines in "Working
v When you install your new server, take the opportunity to download and apply
v Before you install optional hardware devices, make sure that the server is
v Observe good housekeeping in the area where you are working. Place removed
v If you must start the server while the cover is removed, make sure that no one is
v Do not attempt to lift an object that you think is too heavy for you. If you have to
v Make sure that you have an adequate number of properly grounded electrical
v Back up all important data before you make changes to disk drives.
v Have a small flat-blade screwdriver available.
v You do not have to turn off the server to install or replace hot-swap power
v Blue on a component indicates touch points, where you can grip the component
© Copyright IBM Corp. 2006
inside the server with the power on" on page 8, and "Handling static-sensitive
devices" on page 9. This information will help you work safely.
the most recent firmware updates. This step will help to ensure that any known
issues are addressed and that your server is ready to function at maximum levels
of performance. To download firmware updates for your server, go to
http://www.ibm.com/servers/eserver/support/xseries/index.html, select System
x3850 from the Hardware list, click Go, and then click the Download tab. For
additional information about tools for updating, managing, and deploying
firmware, see the System x and xSeries
publib.boulder.ibm.com/infocenter/toolsctr/v1r0/index.jsp.
working correctly. Start the server, and make sure that the operating system
starts, if an operating system is installed, or that a 19990305 error code is
displayed, indicating that an operating system was not found but the server is
otherwise working correctly. If the server is not working correctly, see Chapter 6,
"Solving problems," on page 49 for diagnostic information.
covers and other parts in a safe place.
near the server and that no tools or other objects have been left inside the
server.
lift a heavy object, observe the following precautions:
– Make sure that you can stand safely without slipping.
– Distribute the weight of the object equally between your feet.
– Use a slow lifting force. Never move suddenly or twist when you lift a heavy
object.
– To avoid straining the muscles in your back, lift by standing or by pushing up
with your leg muscles.
outlets for the server, monitor, and other devices.
supplies, hot-swap fans, hot-plug adapters, or hot-plug Universal Serial Bus
(USB) devices. However, you must turn off the server before you perform any
steps that involve removing or installing adapter cables.
to remove it from or install it in the server, open or close a latch, and so on.
®
Tools Center at http://
7
Advertisement
Table of Contents
