Related Manuals for Bosch DIP-7280-00N
Summary of Contents for Bosch DIP-7280-00N
- Page 1 DIVAR IP all‑in‑one 7000 2U DIP‑7280‑00N | DIP‑7284‑8HD | DIP‑7288‑8HD | DIP‑728C‑8HD Installation manual...
-
Page 3: Table Of Contents
Operating as iSCSI storage expansion Using BVMS Config Wizard Adding additional licenses Using BVMS Operator Client Remote connection to the system Protecting the system from unauthorized access Setting up port forwarding Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... - Page 4 Replacing the power distributor 9.16 Monitoring the system 9.17 Recovering the unit 9.18 Service and repair Additional information 10.1 Additional documentation and client software 10.2 Support services and Bosch Academy 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual...
-
Page 5: Safety
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... - Page 6 Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. – Do not install device near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual...
- Page 7 16 A. This must be in accordance with NEC800 (CEC Section 60). – Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual...
-
Page 8: Electrical Safety Precautions
SELV circuits. – If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit checked by Bosch Security Systems. –... -
Page 9: Esd Precautions
Notice! This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 10: Fcc And Ices Compliance
DIVAR IP all-in-one 7000 2U Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of losing information, we recommend multiple, redundant recording systems, and a procedure to back up all analog and digital information. -
Page 11: Data Security Precautions
OS security updates. – Limiting local network access to trusted devices is strongly suggested. Details are described in the Technical note Network Authentication 802.1X and in the Bosch IP Video and Data Security Guidebook, available in the online product catalog. –... -
Page 12: Introduction
If any parts are missing, contact your Sales or Customer Service Representative. Quantity Component DIVAR IP all-in-one 7000 2U Installation manual (English) Power cord EU Power cord US Product registration Please register your product: https://www.boschsecurity.com/product-registration/ 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 13: System Overview
DIVAR IP all-in-one 7000 is a simple and reliable all-in-one recording, viewing and management solution for network surveillance systems. Running the full BVMS solution and powered by Bosch Video Recording Manager (VRM) software, DIVAR IP all-in-one 7000 is an intelligent IP storage device that eliminates the need for separate Network Video Recorder server and storage hardware. -
Page 14: Device Views
LEDs. On the rear there are various I/O ports as well as power supply modules. Front view: 2 USB 2.0 ports Power failure LED Information LED NIC1 and NIC2 LEDs HDD (drive activity) LED Power LED Reset button Power button Hard drive carrier LEDs 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 15: Control Panel Elements
Note: Turning off system power with this button removes the main power, Power but keeps standby power supplied to the system. To remove all power, unplug the system before performing maintenance tasks. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... - Page 16 This LED indicates activity on the HDDs or peripheral drives when flashing. This LED indicates that power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating. Power 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual...
-
Page 17: Hard Drive Carrier Leds
The system power supply temperature has reached 63 °C. The system will automatically turn off when the power supply temperature reaches 70 °C and restart when the power supply temperature goes below 60 °C. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 18: Rack Installation
If the chassis itself shows damage, file a damage claim with the carrier who delivered it and notify the respective Bosch RMA desk. Due to the weight of the system: After opening the top of the shipping box, one person should stand at either end and lift the disk array out together. -
Page 19: General System Precautions
Also refer to the installation instructions that came with the rack unit you are using. Notice! This rail will fit a rack between 26" and 33.5" deep. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 20: Separating The Sections Of The Rack Rails
Caution! Do not pick up the chassis with the front handles. They are designed to pull the system from a rack only. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 21: Installing The Outer Rails To The Rack
4.3.4 Installing the chassis in the rack You can install the chassis in a standard rack or in a Telco type rack. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... - Page 22 Optionally, use screws to secure the front of the chassis to the rack. Installing the chassis in a Telco type rack Notice! Do not use a two post "Telco" type rack. To install the chassis in a Telco type rack: 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual...
-
Page 23: Turning On The System
Plug the power cord from the power supply unit into a high-quality power strip that offers protection from electrical noise and power surges. Bosch recommends to use an uninterruptible power supply (UPS). Push the power button on the control panel to turn on the system. -
Page 24: System Setup
– Pure video recording system, utilizing the VRM core components and services. – iSCSI storage expansion for a BVMS or VRM system, which runs on a different hardware. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 25: Preparing Hard Drives For Video Recording
Hold SHIFT, click Switch User and keep SHIFT pressed for about five seconds. Enter administrator user name and password. On the Desktop, in the Tools folder, right-click the Format_data_hard_drives script, and then click Run as administrator. Follow the instructions. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 26: Starting The Application
We strongly recommend not changing any operating system settings. Changing operating system settings can result in malfunctioning of the system. Notice! To perform administrative tasks, you have to log on to the administrator account. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 27: Operating As Full Video Recording And Management System
The following tasks cannot be done with the Config Wizard. Use BVMS Configuration Client instead. – adjusting schedules – configuring systems with no or multiple Video Recording Manager – configuring external storage devices – adding Video Streaming Gateway Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 28: Adding Additional Licenses
On a computer with Internet access, enter the following URL into your browser: https://activation.boschsecurity.com If you do not have an account to access the Bosch License Activation Center, either create a new account (recommended) or click the link to activate a new license without logging on. - Page 29 To verify playback functionality in the Operator Client The time line moves if the camera is viewed in playback mode. To perform further functionalities refer to the BVMS manual available in the online product catalog. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual...
-
Page 30: Remote Connection To The System
Connection: ssh://[public-IP-address-of-DIVAR-IP_all-in-one]:5322 6.3.2 Remote connection with Video Security App To make a remote connection with Video Security App: In Apple’s App Store search for Bosch Video Security. Install the Video Security app on your iOS device. Start the Video Security app. Select Add. Enter the public IP address or dynDNS name. -
Page 31: Installing An Enterprise Management Server
User name: admin (or other user in case one is configured) Password: enter user password Installing an Enterprise Management Server For a central management of multiple systems you can install Bosch VMS Enterprise Management Server on a separate server. To install Bosch VMS Enterprise Management Server on a separate server: Download the BVMS installer from the product page. -
Page 32: Raid Setup
Select all hard drives that are part of the RAID group. Start the virtual drive initialization. Exit the MegaRAID Configuration Utility program. Perform a complete system recovery (Initial Factory Setup). Refer to – Recovering the unit, page 46 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 33: Troubleshooting
Make sure that the chassis covers are installed. – Make sure that the heat sinks are installed properly. – Make sure that the ambient room temperature is not too high. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 34: Maintenance
To remove the power: Shut down the system. Remove the power cords from the power supplies. Disconnect the cord from the power strip or wall outlet. Removing the chassis cover 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 35: Installing A Sata Hard Drive
Removing a hard drive carrier from a hard drive bay, page 36 . Installing a hard drive into a hard drive carrier, page 36 . Installing a hard drive carrier into a front drive bay, page 37 . Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 36: Removing A Hard Drive Carrier From A Hard Drive Bay
Remove the screws which secure the dummy drive to the hard drive carrier. Remove the dummy drive from the hard drive carrier and place the hard drive carrier on a flat surface. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 37: Installing A Hard Drive Carrier Into A Front Drive Bay
SATA hard drive Notice! Bosch recommends using the respective Bosch hard disk drives. The hard disk drives as one of the critical component are carefully selected by Bosch based on available failure rates. Hard disk drives not delivered from Bosch are not supported. -
Page 38: Identifying A Faulty Ssd Drive
Use the handle to pull the hard drive carrier out of the chassis. Notice! Except for short periods of time (swapping hard drives), do not operate the unit with the hard drives removed from the bays. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 39: Installing A Hard Drive Into A Rear Hard Drive Carrier
Notice! Bosch recommends using the respective Bosch hard disk drives. The hard disk drives as one of the critical component are carefully selected by Bosch based on available failure rates. Hard disk drives not delivered from Bosch are not supported. -
Page 40: Replacing The Dvd Rom Drive
Replace the chassis cover. replace the unit in the rack, if necessary, then turn on the system. Replacing the front port panel If you must install a new or replace a damaged front port panel, observe the following instructions. DVD-ROM Front port panel 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 41: Installing The Motherboard
Turn off the system, lay the chassis on a flat surface, then remove the chassis cover. Install the sound card in the dedicated PCI slot. Put back and secure the chassis cover. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 42: Installing The Air Shroud
Make sure that your air shroud matches your chassis model. Turn off the system and remove the cover. Place the air shroud in the chassis. The air shroud fits behind the two fans closest to the power supply. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 43: Replacing A System Fan
The fans might still be turning when you remove the fan assembly from the chassis. Keep fingers, screwdrivers, and other objects away from the openings in the fan assembly's housing. Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual... -
Page 44: Replacing The Power Supply
This unit might have more than one power supply connection. To de-energize the unit, remove all connections. LED status: – Amber lighted LED: The power supply is off. – Green lighted LED: The power supply is operating. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 45: Replacing The Power Distributor
The power supply can be replaced without turning off the system if a redundant power supply is available. Replacement units can be ordered directly from Bosch RMA desk. To replace the power supply: Unplug the AC power cord of the failed power supply. -
Page 46: Monitoring The System
OS partition (including VMS settings) with a default configuration. In order to access existing video footage after recovery, the VMS configuration needs to be exported before System Recovery and re-imported afterwards. 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... -
Page 47: Service And Repair
The storage equipment is shipped with an original manufacturer Service and Support agreement. The Bosch Technical Support is the Single Point of Contact in case of failure but the Service and Support obligations are fulfilled by the manufacturer or a partner. -
Page 48: Additional Information
– Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual... - Page 49 DIVAR IP all-in-one 7000 2U Additional information | Bosch Security Systems B.V. 2021.03 | V2 | DOC Installation manual...
- Page 50 | Additional information DIVAR IP all-in-one 7000 2U 2021.03 | V2 | DOC Bosch Security Systems B.V. Installation manual...
- Page 52 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2021 202104162220...