Table of Contents
Advertisement
IMPORTANT:
information. To prevent loss of information, save your work or shut down the computer through
Windows before you remove the battery.
Remove the battery:
1.
Loosen the seven Phillips captive screws (1) that secure the battery to the computer.
2.
Swing the rear edge of the battery (2) up and forward until it rests at an angle.
3.
Remove the battery (3) by sliding it up and back at an angle.
To insert the battery, reverse the removal procedure.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-5
Memory module descriptions and part numbers
Description
Memory modules (2, SODIMM, DDR5-5600, 1. 1 V, NECC):
32 GB
16 GB
8 GB
Memory modules (2, SODIMM, DDR5-4800, 1. 1 V, NECC):
32 GB
16 GB
8 GB
Memory module shield (included in the Shield Kit, spare part number N10942-001)
Before removing the memory modules, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
Removing a battery that is the sole power source for the computer can cause loss of
Bottom cover on page
Preparation for disassembly on page
40).
Spare part number
N51121-001
N38627-001
N37792-002
N19982-001
M97596-002
M97595-002
40).
Memory modules
47
Hide quick links:
Advertisement
Table of Contents
