Table of Contents
Advertisement
RESET
LOAD BY
OFF
SIGNAL
ON
FORCED
OFF
MUTE
ON
• SHUTTER SETTINGS
POWER ON
OPEN
SHUTTER
CLOSE
PICTURE
OPEN
MUTE SHUT-
TER
CLOSE
FADE IN TIME
FADE OUT TIME
TIP: The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.
For more information, visit http://www.crestron.com
Reset selected [REF. LENS MEMORY] for the selected [PROFILE] to the default
factory settings.
If input signal is switched, the lens will not shift to the les shift, zoom and focus val-
ues for the selected [PROFILE] number.
If input signal is switched, the lens will shift to the lens shift, zoom and focus values
for the selected [PROFILE] number.
If no adjusted values have been stored to [LENS MEMORY], the lens will apply
[REF. LENS MEMORY] adjusted values. Alternatively, if no adjusted values have
been stored to [REF. LENS MEMORY], the unit will return to the default factory set-
tings.
Not turn off the image during les shift.
Turn off the image during les shift.
When the power is turned on, the light source turns on and the picture is projected.
When the power is turned on, the light source does not turn on.
The light source remains to on when the picture is turned off for switching the input
terminals.
The light source turns off when the picture is turned off for switching the input termi-
nals.
Set how long the light will take to fade in after pressing the SHUTTER button.
Set how long the light will take to fade out after pressing the SHUTTTER button.
59
3. Convenient Features
Advertisement
Table of Contents
