Table of Contents
Advertisement
Replacing the system-board
shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the slots on the system-board shield with the ports on the system
board and place the system-board shield on the display-assembly base.
2
Align the screw holes on the system-board shield with the screw holes
on the display-assembly base.
3
Replace the screws that secure the system-board shield to the display-
assembly base.
Post-requisites
1
Replace the
back
2
Replace the stand.
36
computer. After working inside your
cover.
After working inside your
Advertisement
Table of Contents
