Table of Contents
Advertisement
en-us Basic settings
13 Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
Basic settings
13.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting
Rinse aid disp.
Intensive drying
Signal volume
Wi-Fi
Factory setting
1
Factory setting (may vary according to model)
Tip: Connect your appliance to a mobile device. You can
conveniently change all settings using the
Home Connect® app.
→ "Home Connect® quick start", Page 22
Setting intensive drying
Press
.
1.
1 2 3
To open the appliance settings, press
2.
seconds.
a The refill indicator for rinse aid flashes.
20
Selection
Scale with 4 levels
On
1
Off
Scale with 4 levels
On
1
Off
Reset
button for 3
A
Description
Set or switch off the amount of rinse
aid to be dispensed.
→ "Setting the amount of rinse aid",
Page 14
Switch intensive drying on or off for
each operation.
The temperature in the final rinse is
increased for a better drying result.
This may increase the run time slightly.
Note: Please take care with delicate
dishware.
→ "Setting intensive drying", Page 20
Adjusting the signal volume.
→ "Setting the signal volume",
Page 21
Switch the wireless network connection
on or off.
→ "Setting Wi-Fi", Page 20
The basic setting is not available until
you have connected the appliance with
the Home Connect® app.
→ "Home Connect® ", Page 21
Restore changed settings to the factory
settings.
The settings for initial use must be
configured.
Press
button repeatedly until the Clean and Sanitize
3.
1 2 3
LEDs flash.
Press
button repeatedly until the LED (1) lights up.
4.
1
If the LED is not lit up, intensive drying is switched off.
If the LED is lit up, intensive drying is switched on.
To store the settings, press
5.
Setting Wi-Fi
Press
.
1.
button for 3 seconds.
A
Advertisement
Table of Contents
