hit counter script

Calling Ibm For Service - IBM System x3800 Manual

Hide thumbs Also See for System x3800:
Table of Contents

Advertisement

If the problem is solved when you remove an adapter from the server but the
problem recurs when you reinstall the same adapter, suspect the adapter; if the
problem recurs when you replace the adapter with a different one, suspect the
PCI-X board.
If you suspect a networking problem and the server passes all the system tests,
suspect a network cabling problem that is external to the server.

Calling IBM for service

See Appendix A, "Getting help and technical assistance," on page 167 for
information about calling IBM for service.
When you call for service, have as much of the following information available as
possible:
v Machine type and model
v Microprocessor and hard disk drive upgrades
v Failure symptoms
v Diagnostic program type and version level
v Hardware configuration (print screen of the system summary)
v BIOS code level
v Operating-system type and version level
You can solve some problems by comparing the configuration and software setups
between working and nonworking servers. When you compare servers to each
other for diagnostic purposes, consider them identical only if all the following factors
are exactly the same in all the servers:
v Machine type and model
v BIOS level
v Adapters and attachments, in the same locations
v Address jumpers, terminators, and cabling
v Software versions and levels
v Diagnostic program type and version level
v Configuration option settings
v Operating-system control-file setup
– Does the server fail the diagnostic programs? If so, what are the error codes?
– What occurs? When? Where?
– Is the failure repeatable?
– Has the current server configuration ever worked?
– What changes, if any, were made before it failed?
– Is this the original reported failure, or has this failure been reported before?
105
Chapter 2. Diagnostics

Advertisement

Table of Contents
loading

This manual is also suitable for:

8865

Table of Contents