Table of Contents
Advertisement
Figure 67. Installing filler bracket in the Riser 2c
Next steps
If applicable, install an
expansion card into the expansion card
Installing an expansion card into the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installing a new expansion card, unpack it and prepare the card for installation.
NOTE:
For instructions, see the documentation accompanying the card.
Steps
1. Pull and lift up the expansion card retention latch lock to open.
2. If installed, remove the filler bracket.
NOTE:
Store the filler bracket for future use. Filler brackets must be installed in empty expansion card slots to maintain
Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the
system and aid in proper cooling and airflow inside the system.
Figure 68. Removing a filler bracket from Riser 1
Safety
instructions.
Before working inside your
riser.
system.
Installing and removing system components
71
Advertisement
Table of Contents
