Table of Contents
Advertisement
Item
Digital I/O
Select output signal or I/
control part
O direction signal
setting
I/O direction setting
Input filter upper limit
value
Differential output
HOLD/CLEAR
Analog input
A/D conversion enable/
control part
disable setting
setting
ADC range setting CH0
to ADC range setting
CHB
ADC offset value CH0 to
ADC offset value CHB
Select A/D conversion
timing
ADC oversampling ratio
setting
Analog output
D/A conversion enable/
control part
disable setting CH0, D/A
setting
conversion enable/
disable setting CH1
DAC range setting CH0,
DAC range setting CH1
DAC offset value CH0,
DAC offset value CH1
Select D/A conversion
value
Select D/A conversion
timing
Select DAC LDAC signal
8 FPGA MODULE CONFIGURATION TOOL
104
8.6 Parameter Setting Function
Description
■B0 terminal block, B1 terminal block
It is masked and cannot be set.
■B2 terminal block
Select the input/output direction signal.
*6
■B0 terminal block, B1 terminal block
It is masked and cannot be set.
■B2 terminal block
When "Select output signal or I/O
direction signal" is set to "Register
setting value (RY or I/O direction)", this
item sets the input and output direction
of differential (RS-485) input/output.
■B0 terminal block, B1 terminal block
It is masked and cannot be set.
■B2 terminal block
Sets the filter upper limit value of the
differential (RS-485) input digital filter.
■B0 terminal block, B1 terminal block
*5
It is masked and cannot be set.
■B2 terminal block
Sets the differential (RS-485) output
value when FPGA control stops.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Cannot be set.
Setting range
■B0 terminal block, B1 terminal block
It is masked and cannot be set.
■B2 terminal block
• Register setting value (RY or I/O
direction)
• User circuit output
■B0 terminal block, B1 terminal block
It is masked and cannot be set.
■B2 terminal block
• Input
• Output
■B0 terminal block, B1 terminal block
It is masked and cannot be set.
■B2 terminal block
0 to 4095
■B0 terminal block, B1 terminal block
It is masked and cannot be set.
■B2 terminal block
• CLEAR (fixed to L)
• CLEAR (fixed to H)
• HOLD
Default
Register setting value
(RY or I/O direction)
Input
■B0 terminal block, B1
terminal block
4000
■B2 terminal block
1500
CLEAR (fixed to H)
Advertisement
Table of Contents
Troubleshooting
