Table of Contents
Advertisement
Item
Logging part
Logging operation mode
*1
setting
setting
Buffer operation setting
Select logging start
*1
control
Select sampling pulses
Logging data size
*1
setting
Set number of sampling
*2
after trigger
User circuit part
Logging data time division
*1
setting
setting
USER switch function
enable/disable
User circuit part
parameter setting
*1 This can be set when "Logging function enable/disable" in "Logging setting" of "Module Parameter" is set to "Enable". When set to
"Disable", it is masked and cannot be set.
*2 Can be set when "Logging operation mode setting" is set to "Trigger operation mode". When set to "Storage operation mode", it is
masked and cannot be set.
Description
Select the logging operation mode.
*1
Select linear buffer operation or ring buffer
operation.
Select the logging start signal.
*1
Select the logging cycle.
Logging data size setting
Sets the number of times logging occurs
after trigger input.
Sets Non-Time division mode and Time
division mode.
Enables or disables function setting
switches 7 to 10.
Page 112 User circuit part parameter setting
Setting range
• Storage operation mode
• Trigger operation mode
• Linear buffer operation
• Ring buffer operation
• User circuit output
• Register setting value (RY3)
• Logging cycle timing
• User circuit output
• 256 records
• 512 records
• 1024 records
• 2048 records
• 4096 records
• 8192 records
• 16384 records
• 32768 records
• 65536 records
• 131072 records
• 262144 records
• 524288 records
1 to (number of records in logging data
size setting -1)
• Non-Time division mode
• Time division mode
• Disable
• Enable
8 FPGA MODULE CONFIGURATION TOOL
8.6 Parameter Setting Function
Default
Storage operation
mode
Linear buffer
operation
User circuit output
Logging cycle
timing
4096 records
1
Non-Time division
mode
Disable
8
107
Advertisement
Table of Contents
Troubleshooting
