Table of Contents
Advertisement
FPGA control automatic start
When "FPGA control automatic start setting" is "Enable", FPGA control starts automatically after configuration is complete.
The "FPGA control automatic start delay setting" can be used to set a delay (seconds) before automatic start.
When a moderate error is cleared by turning on and off the error clear request flag (RYA), if "FPGA control automatic start
setting" is "Enable", FPGA control starts automatically.
FPGA
Configuring
Off
FPGA CONF. LED
Remote READY
(RXB)
OFF
Stopping
FPGA control
FPGA controlling flag
(RX0)
OFF
Implemented in FPGA module
■Setting method
Use the FPGA Module Configuration Tool to set parameters. ( Page 98 FPGA parameters)
Operating procedure
1.
Set "FPGA control automatic start setting" to "Enable".
2.
Set the time from after configuration is complete to when the FPGA automatically starts in "FPGA control automatic start
delay setting".
Configuration completed
On
ON
"FPGA control
automatic start delay time"
Control being executed
ON
12 FUNCTIONS
12.5 FPGA Control Function
12
317
Advertisement
Table of Contents
Troubleshooting
