Table of Contents
Advertisement
Error code
Classification
(hexadecimal)
*1
1210H
Minor
*1
1300H
Minor
*1
1400H
Minor
*1
1401H
Minor
*1
1402H
Minor
Error name
Description and cause
Time setting error
The time setting request was issued while
a value set for Time information is in any of
the following states.
• Time information (month) (remote buffer
memory address: 1602H bits 10 to 13) is
a value other than 1 to 12
• Time information (day) (remote buffer
memory address: 1602H bits 5 to 9) is a
value other than 1 to 31
• Time information (hour) (remote buffer
memory address: 1602H bits 0 to 4) is a
value other than 0 to 23
• Time information (minute) (remote buffer
memory address: 1603H bits 8 to 13) is a
value other than 0 to 59
• Time information (second) (remote buffer
memory address: 1603H bits 0 to 5) is a
value other than 0 to 59
• Time information (month, day) is a date
that do not exist in the calendar, such as
April 31st.
Logging timing
In the FPGA internal circuit, a sampling
pulse error
pulse for logging data was input from the
user circuit to the logging part of standard
circuits in a cycle of less than 1s.
FTP communication
The connection became disconnected
error
during communications with the FTP
server.
FTP open error
Connection to the FTP server failed.
FTP login error
Login to the FTP server failed.
Action
Set values that satisfy all of the following
and execute the time setting again.
• Time information (month) (remote buffer
memory address: 1602H bits 10 to 13): 1
to 12
• Time information (day) (remote buffer
memory address: 1602H bits 5 to 9): 1 to
31
• Time information (hour) (remote buffer
memory address: 1602H bits 0 to 4): 0 to
23
• Time information (minute) (remote buffer
memory address: 1603H bits 8 to 13): 0
to 59
• Time information (second) (remote buffer
memory address: 1603H bits 0 to 5): 0 to
59
• Time information (month, day): a date
that exists in the calendar
• Logging data may not be sampled.
• Check the sampling pulse output
specifications of the user circuit of the
FPGA internal circuit. Input the sampling
pulse to the logging part of standard
circuits in a cycle of 1s or longer.
• Check whether the PORT mode can be
used as the FTP server connection
method.
• The Ethernet line may be congested.
Wait for a while and perform the
operation again.
• Check the connection with the FTP
server (such as looseness or
disconnection of the Ethernet cable).
• Check the IP address and subnet mask
of the FPGA module.
• Check the setting of the FTP server IP
address in the FPGA module.
• Check the settings of the FTP server
(such as IP address and subnet mask).
• Check whether the data port number of
the FTP server is set to 20 and the
control port number of the FTP server is
set to 21.
• Check the firewall settings of the FTP
server.
• Check the connection with the FTP
server (such as looseness or
disconnection of the Ethernet cable).
• Check whether the data communications
with the FTP server or the FPGA module
are possible by using the Ping command.
• Data communications may not be ready.
Wait for a while and perform the
operation again.
• Check the FTP client settings of the
FPGA module (login name, password).
• Check the login settings of the FTP
server (login name, password).
• Check the connection with the FTP
server (such as looseness or
disconnection of the Ethernet cable).
24 ERROR CODE LIST
24
455
Advertisement
Table of Contents
Troubleshooting
