Table of Contents
Advertisement
FTP transfer error completion flag
■Device number
Name
FTP transfer error completion flag
■Description
Turns on when the transfer of logging data to the FTP server is completed with an error. For details, refer to the following.
Page 473 FTP transfer completion flag
FPGA control stop while data collection flag
■Device number
Name
FPGA control stop while data collection flag
■Description
Turns on when FPGA control stops while collecting the logging data.
The logging data is not transferred to the FTP server when FPGA control operation stops. Refer to this signal and perform
transfer as necessary.
This signal turns off in the following conditions.
• Logging start request (RY3) was turned on and the logging started.
• Logging start request (RY3) was turned on and the logging data was transferred again from the beginning.
• Logging started from the user circuit.
APPX
474
Appendix 1 Remote I/O Signal
Device number
RX5
Device number
RX6
Advertisement
Table of Contents
Troubleshooting
