Table of Contents
Advertisement
DETAILED CHANNEL SETTINGS
Settings for engine satellite
(DiSEqC 1.2)
Note:
LNB settings described in the following
7
section require significant expertise on
satellite systems. Contact an expert about
the subject.
Your TV supports DiSEqC 1.2 motorized satellite
systems. With this feature, you can control the
satellite on your television.
Adjust the satellite antenna position for each
satellite. By storing these settings, the antenna
can be moved to a previously saved location
when needed.
H
1
Press »
TV« to return to the TV mode.
2
Select »Source« with »
»
«.
3
Select »satellite« and confirm with »
)
4
Press »
« and select »Settings« with »
and confirm with »
5
Confirm »Channels and Inputs« with »
6
Select »Channels« and confirm with »
– Channel menu shall be displayed.
7
Confirm »Satellite« with »
8
Confirm »Channel Installation Mode« with
»
«.
9
Select »Satellite (Standard)« with »
»
« or if you are using an operator, select
Λ
»Satellite (Operator Mode)« and confirm
with »
«.
10
Press »
« to return to the previous menu.
a
11
Use »
« or »
V
Λ
confirm with »
12
Use »
« or »
V
Λ
Channel Scan« and confirm with »
– A utomatic Channel Scan menu shall be
displayed.
100
ENGLISH
)
« and confirm with
« .
«.
« or
V
« to select »Channels« and
« button.
« to select »Automatic
«.
13
Select »Other« with »
»
« to confirm.
Automatic Channel
Scan
Proceed
Other
«.
>
«
«.
14
Use »
«.
V
and confirm with »
Automatic Channel
Scan
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
----------------------------------------------------
« or »
V
« or »
« to select »DiSEqC 1.2«
Λ
«.
« and press
Λ
Advertisement
Table of Contents
