Receiving A Call From A Remote Party; Answering A Call From A Remote Party - Sony PCS-11 Operating Instructions Manual
Hide thumbs
Also See for PCS-11:
- Operation manual (156 pages) ,
- Operation manual (13 pages) ,
- Operation manual (2 pages)
Table of Contents
Advertisement
Receiving a Call from a Remote Party
Operations for answering a call differ depending on the setting of the answer
mode.
Auto answer mode
The system automatically receives a call from a remote party and you can start
conferencing. Although no operation is necessary to start, the picture on the
local site will be displayed on the remote site screen even if you are not ready
to begin.
Manual answer mode
When there is an incoming call, the Communication Terminal rings. You need
to connect the call manually before starting the conference.
You can start it whenever you are ready.
Notes
• You cannot answer the call unless the power switch on the Communication Terminal
is set to on (
• Make sure that the TV monitor is turned on. If you insert the IR repeater under the
remote sensor on the Sony TV, set the TV to standby mode.
For setting of the answer mode, see "Auto Answer" in the Answer Setup menu
on page 39.
Answering a Call from a Remote Party
To answer a call in auto answer mode
When you receive a call, the Communication Terminal rings and the message
"Incoming Call" appears on the monitor screen. The system is automatically
connected and the picture of the remote party is displayed on the local monitor
screen and the sound is heard. The picture and sound on the local site will be
enabled on the remote site at the same time.
The message "Meeting starts!" appears on the monitor screen.
You are now ready to start a conference.
@
).
Meeting starts!
Picture on the local site
Picture on the remote site
Receiving a Call from a Remote Party
83
Advertisement
Table of Contents
