Table of Contents
Advertisement
SaFety PrecaUtIoNS
WIrING
the information contained in this manual is intended for use
by an industry-qualified, experienced, certified electrician
familiar with the U.S. National electric code (Nec) who is
equipped with the proper tools and test instruments.
Failure to carefully read and follow all instructions in this manual can
result in equipment malfunction, property damage, personal injury or
death.
High voltage electricity is required to operate this system.
adhere to the Nec code and these instructions when wiring.
Improper connections and inadequate grounding can cause accidental
injury or death.
always ground the unit following local, state, and Nec
codes.
There is risk of fire, electric shock, and physical injury or death.
refer to local, state, and federal codes, and use power wires
of sufficient current capacity and rating.
Wires that are too small may generate heat and cause a fire.
Note:
Do not supply power to the unit until all electrical wiring,
controls wiring, piping, installation, and refrigerant system
evacuation are completed.
6
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Secure all field wiring connections with appropriate wire
strain relief.
Improperly securing wires will create undue stress on equipment power
lugs. Inadequate connections may generate heat, cause a fire and physi-
cal injury or death.
Properly size all circuit breakers or fuses.
There is risk of fire, electric shock, explosion, physical injury or death.
Properly tighten all power lugs.
Loose wiring may overheat at connection points, causing a fire, physical
injury or death.
Do not change the settings of the protection devices.
If the pressure switch, thermal switch, or other protection devices
are bypassed or forced to work improperly, or parts other than those
specified by LG are used, there is risk of fire, electric shock, explosion,
and physical injury or death.
turn the power off at the nearest disconnect before servicing
the equipment.
Electrical shock can cause physical injury or death.
Hide quick links:
Advertisement
Table of Contents
