hit counter script
Table of Contents

Advertisement

Available languages

Available languages

12
www.aeg.com
Display
ECOMETER indicator
In order to switch the ECOMETER on or
off:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
show respectively
or
for the disabled ECOMETER
indicator.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Button sounds
You can enable or disable the button
sounds in the Setting mode. To enable or
disable the sounds:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
Tap
on or off. The indicator will change to
for the enabled or
disabled sounds.

5. DAILY USE

5.1 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf up until it
comes free.
Default parame‐
ters
ECOMETER indica‐
tor
Button sounds
Temperature units
Factory settings
.
repeatedly. The indicator will
for the enabled
.
repeatedly until you see
to switch the sounds either
for the
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Temperature units
Using the Setting mode, you can change
the temperature unit displayed on the
control panel from Celsius to Fahrenheit.
To change the temperature unit:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
repeatedly until you see
and
. Tap the indicator showing
the unit to select between
Celsius and
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Factory settings
This function restores each setting to the
factory default settings. To restore the
factory default settings:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
repeatedly until you see
and
. Tap
see
.
turns into blinking
into solid
factory settings are restored.
3. Press and hold the ECO button for
.
approximately 3 seconds to exit the
Setting mode.
2. Reposition as required.
.
for
for Fahrenheit.
.
repeatedly until you
and then
, which indicates that

Advertisement

Table of Contents
loading

Table of Contents