Table of Contents
Advertisement
PM Mode
•
Power Off
(Default): Set the normal DC off mode.
Sustain Aspect
Ratio: Identical to normal DC off mode except that the Switching IC remains on. On certain models,
•
this applies only to a specific input mode (DisplayPort) and has the same effect as
Always
•
Screen
Off: Switches to
Down mode.
•
Screen Off
Always: Switches to
Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's
Power button or the monitor's Off button.
•
Screen Off & Backlight
NOTE
•
In order for the screen to switch from
or Input button, or the monitor's On button.
Power On
Delay(0-250)
•
This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.
•
You can set the delay interval in the range of 0 to 250 seconds.
Power On Status
•
Select the operating status of the monitor when the main power has turned on.
•
You can choose from among
PWR (Power On)
•
keep the monitor powered on when the main power has turned on.
•
STD (Standby)
switch the monitor to Standby status when the main power has turned on.
•
LST (Last Status)
switches the monitor back to its previous status.
Wake On LAN
•
Set whether to use
Wake On
•
You can set the feature to On or Off for each wired/wireless network.
•
Wired: When set to On, the
wired network.
•
Wireless
Network: When set to On, the
through a wireless network.
in other input modes.
Screen Off
status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal Shut
Screen Off
status when entering DPM, Auto Power Off (15 min, 4 hours), Off Time
On: Partially turns on the backlight to keep the display at a proper temperature when in
Screen Off status.
Screen Off
to On status, there must be input from the remote control's Power
PWR (Power
On),
STD
LAN.
Wake On LAN
feature is enabled, letting you turn the product on remotely through a
Wake On LAN
(Standby),
and LST (Last
feature is enabled, letting you turn the product on remotely
Status).
13
Screen Off
Advertisement
Chapters
Table of Contents
