Table of Contents
Advertisement
From USB Connection
IMPORTANT! Back up the files on your USB storage devices
before connecting them to the TV. Manufacturer will not be
responsible for any file damage or data loss. Certain types
of USB devices (e.g. MP3 Players) or USB hard disk drives/
memory sticks may not be compatible with this TV. The TV
supports FAT32 disk formatting, NTFS is not supported. FAT32
formatted devices with a storage capacity larger than 2TB
are not supported. Files larger than 4 GB are not supported.
You can view your photos, text documents or play your
music and video files installed on a connected USB
storage device on the TV. Plug in the USB storage
device to one of the USB inputs on the TV.
On the main media player screen select the desired
media type. On the next screen, highlight a file name
from the list of available media files and press the OK
button. Follow the on-screen instructions for more
information on other available button functions.
Note: Wait a little while before each plugging and unplugging
as the player may still be reading files. Failure to do so may
cause physical damage to the USB player and the USB device
itself. Do not pull out your drive while playing a file.
USB Auto Play Feature
This feature is used to start playing the media content
installed on a removable device automatically. It uses
the Multi Media Player application. The media content
types have different priorities in order to be played. The
reducing priority order is as Photo, Video and Audio.
That means, if there is Photo content in content in the
root directory of the removable device, the Multi Media
Player will play the Photos in a sequence (in file name
order) instead of Video or Audio files. If not, it will be
checked for Video content and as last Audio.
You can enable the USB Auto Play feature from within
the Multi Media Player app. Launch the application on
the Home Screen and press the Yellow button on the
remote to enable or disable this feature. If the feature
is enabled while the USB device is already connected,
unplug the device and then plug it back in to activate
the feature.
This feature will only work if all of the following cir-
cumstances occur:
• The USB Auto Play feature is enabled
• The USB device is plugged in
• Playable content is installed on the USB device
If more than one USB device is connected to the TV,
the last one plugged in will be used as content source.
USB Recording
To record a programme, you should first connect a USB
storage device to your TV while the TV is switched
off. You should then switch on the TV to enable the
recording feature.
To record long duration programmes such as movies, it
is recommended to use USB Hard disk drives (HDD's).
Recorded programmes are saved onto the connected
USB storage device. If desired, you can store/copy
recordings onto a computer; however, these files will
not be available to be played on a computer. You can
play the recordings only via your TV.
Lip Sync delay may occur during the timeshifting. Radio
record is supported.
If the writing speed of the connected USB storage
device is not sufficient, the recording may fail and the
timeshifting feature may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not pull out the USB/HDD during a recording. This
may harm the connected USB/HDD.
Some stream packets may not be recorded because
of signal problems, as a result sometimes videos may
freeze during playback.
If a recording starts from timer when teletext is on, a
dialogue will be displayed. If you highlight Yes and press
OK teletext will be turned off and recording will start.
Instant Recording
Press Record button to start recording an event
instantly while watching a programme. Press Stop
button to stop and save the instant recording.
You can not switch broadcasts during the recording
mode.
Watching Recorded Programmes
Select Record List from the Record menu in Live
TV mode and press OK. Select a recorded item from
the list (if previously recorded). Press the OK button
to watch.
Press the Stop or Back/Return button to stop a
playback.
The recordings will be named in the following format:
Channel Name_Date(Year/Month/Day)_Programme
Name.
Timeshift Recording
In order to use timeshift recording feature Time Shift
Mode option in the Record>Time Shift Mode menu
should be enabled first.
In timeshifting mode, the programme is paused and
simultaneously recorded to the connected USB storage
device. Press Pause/Play button while watching a
broadcast to activate timeshifting mode. Press Pause/
Play button again to resume the paused programme
from where you stopped. Press the Stop button to stop
timeshift recording and return to the live broadcast.
When this feature is used for the first time Disk Setup
wizard will be displayed when the Pause/Play button is
pressed. You can either choose Auto or Manual setup
mode. In Manual mode, if you prefer, you can format
English - 30 -
Hide quick links:
Advertisement
Table of Contents
