Advertisement
Quick Links
FM/AM DIGITAL SYNTHESIZER TUNER
Operating
Instructions
2 PIONEER meen orn eorenen moan F-93
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
*
In some countries or regions, the shape of the power plug and power
outlet may sometimes différ from that shown
in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING:
to prevENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
{For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel. Please
write this serial number onyour enclosed warranty card and keep it in
a secure area, This is for your security.
[For Canadian model]
CAUTION:
to prevent ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
ATTENTION: pour prevenir Des CHOCS ELECTRIQUES
EN PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGA-
TEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE
COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND
SANS EN LAISSER AUCUNE PARTIE A DEGOUVERT.
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention
to Article 820-22
of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K., and Australian models
are not provided with this switch. Mains voltages in
Saudi Arabia are 127 V and 220 V only. Never use this
model with 110 V setting in Saudi Arabia.
You will find the line voltage selector switch on the rear panel. Before
your model is shipped from the iactory, th
set to the power
requirements of the destination; r
you should
check that
itis set properly before plugging the pow:
ard inte tHe AC
puter.
Hf
the voltage is not properly set,
or if you move to an area where the
voltage requirements differ, adjust the selector switch as follows. Before
adjusting, disconnect the power cord.
1. Provide yourself with a medium: sizi
wer
2. Using the screwdriver turn until the arrow points to the voltage level
of your area.
"VOLTAGE
SELECTOR =
HO 127
Medium-size screwdriver
©) PIONEER'
The Art of Entertainment
Advertisement
