Advertisement
Quick Links
FM/AM
DIGITAL SYNTHESIZER
TUNER
Operating
Instructions
F-225L/F-225
@PIONCER
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know
how to operate
your model
properly.
After you
have
finished reading the instructions, put them away in a safe place
for future reference.
in some countries or regions, the shape of the power plug and
power
outlet may sometimes
differ from that shown
in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
.
WARNING :1o prevent FIRE OR SHOCK HAZ-
ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
tanty card and keep it in a secure
area. This is for your
security.
[For Canadian
model]
CAUTION:10
prevent
ELECTRIC SHOCK
DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:pour
prevenin
Les
cHocs
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
LINE VOLTAGE
SELECTOR
SWITCH
Only
multi-voltage
models
are provided
with this
switch. U.S., Canadian, European, U.K., and Austra-
lian models are not provided with this switch.
Mains voltages
in Saudi
Arabia are 127V and 220V
only.
Never
use
this
mode!
with
110V
setting
in
Saudi Arabia.
The tine voltage selector switch is on the rear panel. Before your
modei
is shipped
from
the factory, this switch is set to the
power
requirements
of the destination.
Check
that it is set
properly
before
plugging
the power
cord
into the AC wail
socket. If the voltage is not properly set or if you move to an
area where the voitage requirements differ, adjust the selector
switch as follows.
1. Use a medium-size screwdriver.
2. insert
the
screwdriver
into
the
groove
on
the
voltage
selector, and adjust so that the tip of the arrow points to the
voltage value of your area.
'
~
Set the voltage selector
r the voltage in
your area.
fo
'
y'
A
Medium-size
screwdriver
The future of sound and vision.
Advertisement
