Table of Contents
Advertisement
20
www.aeg.com
Let the appliance dry fully
with the door open. To
speed up the drying you can
close the door and heat up
the appliance with True Fan
Cooking at temperature
150°C for approximately 15
minutes.
When the water drawer is
running out of water, an
acoustic signal sounds and
the water drawer needs to
be refilled to continue the
steam cooking as described
above.
6.9 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).
Minute Minder
Duration
End Time
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
6.10 Fast Heat Up Indicator
This function decreases the heat-up time.
Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold
seconds. The heat-up indicator
alternates.
6.11 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
Application
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use
to activate the function. Press
to set the minutes and
To set the length of an operation (max. 23 h
59 min).
To set the switch-off time for a heating func-
tion (max. 23 h 59 min).
for 3
or
to start.
Advertisement
Table of Contents
