hit counter script

Toro Riding Mower Safety - Toro 74760 Operator's Manual

Hide thumbs Also See for 74760:
Table of Contents

Advertisement

If fuel is spilled on clothing, change clothing
immediately.
Never overfill the fuel tank. Replace gas cap and
tighten securely.
General Service:
Never operate a machine inside a closed area.
Engine exhaust contains carbon monoxide, which
is an odorless, deadly poison that can kill you.
Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good
condition.
Never interfere with the intended function of a
safety device or to reduce the protection provided
by a safety device. Check their proper operation
regularly.
Keep the machine free of grass, leaves, or other
debris build-up. Clean up oil or fuel spillage fuel
soaked debris. Allow the machine to cool before
storing.
Stop and inspect the equipment if you strike an
object. Repair, if necessary, before restarting.
Never make any adjustments or repairs with the
engine running.
Grass catcher components are subject to wear,
damage and deterioration, which could expose
moving parts or allow objects to be thrown.
Frequently check components and replace
with manufacturers' recommended parts, when
necessary.
Mower blades are sharp and can cut. Wrap the
blade(s) or wear thickly-padded gloves, and use
extra caution when servicing them.
Check for proper brake operation frequently.
Adjust and service as required.
Maintain or replace safety and instruction decals
as necessary.
Removing standard original equipment parts and
accessories may alter the warranty, traction, and
safety of the machine. Failure to use original
Toro parts could cause serious injury or death.
Making unauthorized changes to the engine, fuel
or venting system, may violate EPA and CARB
regulations.
Replace all parts including, but not limited to, tires,
belts, blades, and fuel system components with
original Toro parts.

Toro Riding Mower Safety

The following list contains safety information specific
to Toro products or other safety information that you
must know that may not be included in the ANSI
standards.
Stop the engine, move the motion-control levers
to N
and outward to the P
EUTRAL
disengage the blade-control switch, remove
key before and disconnect spark plug wire(s)
performing any service, repairs, maintenance or
adjustments.
Keep hands, feet, hair, and loose clothing away
from attachment discharge area, underside of
mower and any moving parts while engine is
running.
Do not touch equipment or attachment parts which
may be hot from operation. Allow to cool before
attempting to maintain, adjust or service.
Battery acid is poisonous and can cause burns.
Avoid contact with skin, eyes, and clothing. Protect
your face, eyes, and clothing when working with a
battery.
Battery gases can explode. Keep cigarettes,
sparks and flames away from battery.
Use only Toro approved attachments. Warranty
may be voided if used with unapproved
attachments.
If loading the machine onto a trailer or truck, use
a single, full-width ramp only. The ramp angle
should not exceed 15 degrees.
6
position,
ARK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter mx 4250

Table of Contents