Table of Contents
Advertisement
3. Press each light button after one another.
The LED goes off after pressing light button.
4. Applies for the KP8F:
After connecting the EMERGENCY-STOP button or the buttons, execute a function test.
5. Execute a function test after connecting a sensor.
Switching off the HMI device
You have the following options for switching off the HMI device:
● Switch off the power supply.
In fail-safe mode of the PROFIsafe device, the system goes to a fail-safe state .
4.6
Securing the cables
After the power-on test, use cable ties to secure the connected cables to the marked fixing
elements to ensure strain relief.
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
Mount and connect KP8 and KP8F
4.6 Securing the cables
51
Advertisement
Table of Contents
