Table of Contents
Advertisement
SupremeFX Hi-Fi specifications summary
Hardware
Headphone Output
Performance
Rear I/O Ports
Front I/O Ports
Dimensions
1 x ESS ES9018K2M SABRE DAC
2 x LM4562 Op amps
1 x TPA6120A2 Headphone amp
1 x Cirrus Logic CS5361
5 x RC4580 Op amps
Supported formats: Up to 32-bit/384kHz and DSD 64/128*
Output (32Ohms): 4.8VRMS (720mW RMS per channel)
Output (600Ohms): 6.8VRMS (77mW RMS per channel)
THD+N @ 1K (-3dB): -104dB (<0.0007%)
Signal to Noise Ratio (A-weighted): -121.1dB
Crosstalk: -98dB
* Sample rates greater than 32-bit/96kHz are only supported when high
speed mode is enabled.
POWER : 1 x 6-pin PCIe power connector
SIGNAL : 1 x USB 2.0 header
1 x Volume control knob
1 x 6.3mm headphone jack*
1 x 3.5mm headphone jack*
1 x 3.5mm mic/line in jack
* Only one of these jacks will be active at a given time
5.25" ODD drive bay Form Factor (14.5 x 4.2x 14cm [W x H x D])*
* The face of this device is designed to be flush with a standard drive bay
with the knob extending 1cm
xv
Advertisement
Table of Contents
