Table of Contents
Advertisement
5.
USB 2.0 connectors (10-1 pin USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that support up to
480 Mb/s connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then
install the Q-Connector (USB) to the USB connector onboard if your chassis supports front
panel USB ports.
•
•
1-28
The USB 2.0 module is purchased separately.
1 x USB 2.0 port (USB1112) at mid-board shares with ROG extension (ROG_EXT)
port.
Chapter 1: Product Introduction
Advertisement
Table of Contents
