Service And Repairs; Hopper Assembly - Toro 31050 Service Manual

Hide thumbs Also See for 31050:

Service and Repairs

Removing the Hopper Assembly

ProLine H800

19241SL Rev B

Flange bushing

Hydraulic cylinder

1. Park the machine on a level surface, lower the cutting deck, shut off the

engine, set the parking brake and remove the key from the key switch.

2. Disconnect the hopper micro switch connector from the machine wire

3. Support the hydraulic actuators (8) before loosening the mounting fasteners.

4. Remove the nut (10) and bolt (9) that secures the hydraulic cylinder to the

hopper assembly.

Hopper Assembly: Service and Repairs

Proline h800 31050te 31051