Table of Contents
Advertisement
Cooling fan
Removing a cooling fan
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
Steps
1. Disconnect the cooling fan cable from the system board connector.
2. Remove the cable from the cable retention tabs.
NOTE:
Observe the routing of the cable as you remove it from the system.
3. Press the release tab, and lift the cooling fan from the cooling fan cage.
NOTE:
The numbers on the image does not depict the exact steps. The numbers are just for representation of
sequence.
Figure 27. Removing a fan
NOTE:
Ensure to disconnect the cooling fan 1 cable from the connector on the power interposer board.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
37
Advertisement
Table of Contents
