Step 5.
Connect the ac power adapter and all disconnected cables to the computer.
Memory module shielding cap
Follow the instructions to replace the memory module shielding cap.
Before you start, read
Generic Safety and Compliance Notices
Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 34.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 34.
Part location
• ThinkPad T14 Gen 5 and ThinkPad P14s Gen 5 AMD
and print the following instructions.
Chapter 6
.
45
CRU replacement