Memory module
Follow the instructions to replace the memory module.
Before you start, read
Generic Safety and Compliance Notices
Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 34.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 34.
5. Remove the memory module shielding cap. See "Memory module shielding cap" on page 45.
Note: Ensure that you follow the installation order for memory modules shown in the following table.
Memory modules
one
two
Part location
• ThinkPad T14 Gen 5 and ThinkPad P14s Gen 5 AMD
48
ThinkPad T14 Gen 5/P14s Gen 5 AMD/T16 Gen 3 Linux User Guide
Installation order
Slot 1
Slot 1 and slot 2
and print the following instructions.