Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Asus ROG Flow X16 Series
Summary of Contents for Asus ROG Flow X16 Series
- Page 1 ROG Flow X16 (GV601R) Series Service Guide...
- Page 2 LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property;...
- Page 3 Disclaimer ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. Safety precautions • Keep liquids or moisture away from your Notebook PC before installing or removing any components. • Ensure to place your Notebook PC on a stable surface before installing or removing any components.
-
Page 4: Table Of Contents
Table of Contents ⚫ Service Overview ⚫ ASUS ROG Flow X16 (GV601R) Series Overview ⚫ Components Top View ⚫ Components Bottom View ⚫ Repair Overview ⚫ Appropriate Tools ⚫ Keyparts and Related Parts ⚫ Disassembly Steps : • BOTTOM CASE •... -
Page 5: Service Overview
Service Overview • Carefully read through this Service Guide for a look at various components of the device before performing any service and repairs. • To provide the best service, we have provided the below information for technicians from distributors and resellers to perform the complete device disassembly and assembly. -
Page 6: Asus Rog Flow X16 (Gv601R) Series Overview
ASUS ROG Flow X16 (GV601R) Series Overview Bottom View Top View Cover ❶ Array microphones ❷ Camera ❸ Camera indicator ❹ 360 ͦ - adjustable touch screen panel ❺ Audio speakers ❻ Capital lock indicator ❼ Keyboard ❽ Touch pad ❶... -
Page 7: Components Top View
Components Top View BATTERY TOUCH PAD TWEETER CAMERA HD RGB/IR ARRAY MIC CR LCD COVER ASSY HALL SENSOR FFC (CAMERA LED SPONGE) (CAMERA LED SPONGE R) MAIN BOARD THERMAL MODULE ASSY WOOFER HALL SENSOR BOARD LCD Panel (MIC RUBBER) IRCAMMIC FPC POWERKEY FPC G SENSOR FPC BOTTOM CASE ASSY... - Page 8 Components Top View SODIMM CONN MYLAR WIFI MAIN ANTENNA WIFI AUX ANTENNA GC CONNECTOR RUBBER TWEETER TAPE LCD SPONGE SODIMM CONN ABSORBER CAM TOUCH CABLE CABLE TAPE SSD ABSORBER BATTARY GASKET DDR ABSORBER NR2203RM BATTERY GASKET 2 AMD CPU FP7 KAPTON GV601VU BATTERY GASKET 1 Back...
-
Page 9: Components Bottom View
Components Bottom View LCD PANEL KEYBOARD MODULE NR2203RM LCD ADHESIVE TOP 2 NR2203RM LCD ADHESIVE TOP 1 NR2203RM LCD ADHESIVE R NR2203RM LCD ADHESIVE L LCD COVER ASSY BOTTOM CASE ASSY NR2203RM LCD ADHESIVE BOT 1 NR2203RM LCD ADHESIVE BOT 3 THERMAL MODULE ASSY TOUCH PAD NR2203RM LCD ADHESIVE BOT 2... -
Page 10: Repair Overview
Repair Overview This chapter describes disassembly and assembly (Assemble document please look up from the last page), please follow the information provided in this section to perform the complete disassembly procedure. Precautions: Before you perform any service or repair on the notebook, please pay special attention to the cautions prevent any damages to the notebook. 1. -
Page 11: Appropriate Tools
Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Flow X16 (GV601R) Series notebook. Screwdriver Alcohol 95% Glove Dust-free Cloth Please accord to different screw specification to choose different screwdriver and head. Plastic Blade Thermal Pad PLASTIC CARD T=0.35mm... - Page 12 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Flow X16 (GV601R) Series notebook. ❺ ❼ ❶ ❸ ❻ ❷ ❹ Item Part Name Memo ❶ Silicone scraping pen Please store it in the environment of 10 ~ 40 ℃.
-
Page 13: Bottom Case
BOTTOM CASE Disassembly Notice Step 1 : Remove screws *13pcs. Screws Spec Torque (kgf-cm) Step 2 : Use plastic blade to pry the bottom case. M2*9.5L (4.5,0.8) (K) #1 2.3±0.1 M2*3.5L (4.5,0.8) (K) #1 2.3±0.1 Start To avoid the bottom case hook, Please follow above arrow direction don't insert plastic blade in each with using plastic blade to pry bottom... -
Page 14: Disconnect Battery Connector
DISCONNECT BATTERY CONNECTOR Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Before disassembly battery connector, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to IC damage. Step 1 : Use the non-conductive pry tool to push iron sheet. -
Page 15: Ssd
Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove the screw *1pc. Screws Spec Torque (kgf-cm) Assembly Notice Step 2 : Remove SSD module. Step 3 : Remove SSD THERMAL PAD. M2*3.5L (4.5,0.8) (K) #1 1.5±0.1 When required install two SSD, please Step 4 : Remove SSD ABSORBER from both side of SSD Card. - Page 16 Assembly Notice Please be sure to pull out adapter and disconnect the battery. When installing SSD, please follow the steps below. 1. Due to two SSD slot need using different Thermal Pad, please according to the list to order parts. When installing the SSD, please keep the SSD less then 15 degrees 2.
-
Page 17: Ddr
Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Open up SODIMM CONN MYLAR, Unlock and remove the RAM module. Step 2 : Open up SODIMM CONN ABSORBER, then Unlock and remove the RAM module. Step 3 : Tear off DDR ABSORBER from both RAM module. - Page 18 Assembly Notice Please be sure to pull out adapter and disconnect the battery. When installing DDR, please follow the steps below. 1. Align and paste DDR ABSORBER on RAM Module. 2. Align and insert RAM Module at 30° into the memory slot. After inserted properly, push down the RAM Module until it clicks in place, then cover SODIMM CONN ABSORBER and SODIMM CONN MYLAR back.
-
Page 19: Battery
BATTERY Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Before disassembly battery connector, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to IC damage. Step 1 : Remove the screws *4pcs. Screws Spec Torque (kgf-cm) -
Page 20: Wifi Card
WIFI CARD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Tear off the CABLE Tape . Screws Spec Torque (kgf-cm) Step 2 : Disconnect WIFI ANTENNA Cables and remove the screw *1pc, then remove WIFI Card. M2*3.5L (4.5,0.8) (K) #1 1.5±0.1 Tear off (Red mark) -
Page 21: Sys Fan (With Main Board、Thermal Module & Fan)
SYS FAN (with Main Board、Thermal Module & FAN) Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect SYS FAN connector and remove screws *2pcs, then remove SYS FAN. Screws Spec Torque (kgf-cm) Step 2 : Disconnect connector *10pcs. -
Page 22: Thermal Module & Fan
THERMAL MODULE and FAN Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Please follow the reverse screw numbers to remove screws *8pcs, and release Mylar *1pc on Thermal Module, then remove Thermal Module from Main-board. Step 2 : Disconnect FAN connector *2pcs. - Page 23 THERMAL MODULE and FAN Assembly Notice Please be sure to pull out adapter and disconnect the battery. Step-1 THERMAL MODULE Location:[VRAM/CHOKE/MOS] Material: FCR-AS Grease MB Location:[GPU] Material: Main (GA500 Grease) Substitute ( PSX Thermal pad) Step-2 Please refer Repair Notice SOP Liquid metal rework when reassemble thermal module before.
-
Page 24: Main Board
MAIN BOARD Mainboard connector placement CPU FAN GPU FAN SYS FAN EDP CABLE CAM TOUCH CABLE TWEETER K/B FPC TP FFC HALL SENSOR B/L FPC WOOFER POWER KEY Supports using JIG BOARD to refresh F1 BIOS Back... - Page 25 MAIN BOARD Materials on mainboard GA402RK AMD CPU NR2203RM THERMAL WASHER ASSY GV301RE MB BOTTOM MYLAR NR2203RM MB BOT GA401IV CPU BACK BKT ASSY FP7 KAPTON CPU SPONGE (For NR2203RW) GA401QM GN20 GPU BKT ASSY GA503QS MB TOP RUBBER2 GX703HS GN20-E GPU ABSORBOR (For NR2203RM) GX703HS GN20-E3 GPU ABSORBOR (For NR2203RE)
-
Page 26: Tweeter And Woofer
TWEETER and WOOFER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Tear off Tweeter Tapes *2pcs and Cable tape *1pc. Step 2 : Take out the TWEETER and remove it. Assembly Notice Step 3 : Remove WOOFER. -
Page 27: Hall Sensor Board
HALL SENSOR BOARD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove HALL SENSOR BOARD and FFC, then disconnect HALL SENSOR FFC *1pc. Assembly Notice Step 2 : Remove POWERKEY FPC and POWER KEY BRKT ASSY *1pc. Step 3 : Remove POWERKEY *1pc. -
Page 28: Keyboard Module
KEYBOARD MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Tear off Tape and disconnect TP FFC. Screws Spec Torque (kgf-cm) Step 2 : Remove screws *3pcs, and then remove TOUCHPAD. Step 3 : Remove screws *6pcs ,and release ACETATE Clothes and CONDUCTIVE Tape. M2*2.5L (4.5,0.5) (K) #1 2.0±0.1 Step 4 : Flip up the and remove the Keyboard Module. - Page 29 KEYBOARD MODULE Assembly Notice Please be sure to pull out adapter and disconnect the battery. When assembly the KEYBOARD Module, please follow the image below to tidy When assembly the WIFI ANTENNA, please follow the location below to tidy up cables up cables ,and paste ACETATE Clothes and CONDUCTIVE Tape.
-
Page 30: Lcd Bezel
LCD BEZEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Use plastic blade to pry the LCD BEZEL. Move the plastic blade to pry and separate the Bezel Pry the Bezel Start (BEZEL) Back... - Page 31 LCD BEZEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. Please follow the yellow mark to tidy up EDP cable and TOUCH Cable. When LCD BEZEL assembly, please follow the location below to Please make sure both cables are laid out into HINGE CAP. pasted LCD SPONGE first.
-
Page 32: Lcd Panel
LCD PANEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Pull out LCD adhesive *2pcs. Step 2 : Using plastic blade to separate and teardown the panel. Step 3 : Remove LCD PANEL and EDP Cable. Due to some adhesive (Yellow mark) behind the panel, please separate panel by using plastic blade start from the bottom left and right side. - Page 33 LCD PANEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. When reuse the LCD PANEL or LCD Cover: When reuse the LCD COVER: Please use the fingertip to clean the residual adhesive on back side of PANEL Please paste below new LCD ADHESIVE *7pcs on LCD COVER.
- Page 34 LCD PANEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. When assembly the LCD PANEL: Step 1 : Remove release paper of LCD Adhesive *7pcs. Step 2 : Connect cables well, and align the LCD to the upper side of LCD Cover then assembly. Step 3 : Using thumb with Dust-free cloth to press and push panel.
-
Page 35: G Sensor Fpc
G SENSOR FPC Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect GSENSOR FPC and then take it out from panel backside. Disconnect (GSENSOR FPC) Back... -
Page 36: Lcd Cover
LCD COVER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect CAM TOUCH Cable, and remove it. Step 2 : Remove IRCAMMIC FPC *1pc, and then remove LCD RUBBER. Step 3 : Remove CAMERA HD RGB/IR ARRAY MIC CR, MIC RUBBER *2pcs, and CAMERA LCD SPONGE from LCD COVER. Remove (CAMERA LED SPONGE) (MIC RUBBER) - Page 37 LCD COVER Assembly Notice Please be sure to pull out adapter and disconnect the battery. When CAM FPC assembly, please follow the location below to fix FPC. When replace IRCAMMIC FPC, please follow the location below to fix LCD SPONGE. (LCD SPONGE) When replace CAMERA HD RGB/IR ARRAY MIC CR, please follow the location below to paste new CAMERA LED SPONGE.