Table of Contents
Advertisement
OPERATION
Control Panel and Remote Control
NOTE
• The feature may be changed according to the type of model.
• On control panel surface have protection film, Please remove film before use.
Power
Press to turn the air conditioner ON or
OFF.
Fan Speed
Press to set the Fan Speed to Auto
(AU), Low (F1) or High (F2).
Delay ON/OFF Timer
Delay ON - When the air conditioner is
off, set it to automatically turn on from 1
to 24 hours later, at its previous mode
and fan settings.
Delay OFF - When the air conditioner is
on, set it to automatically turn off from 1
to 24 hours later.
NOTE
• Each press of the Timer button
advances the timer by 1 hour. After
the last press the display returns to
the temperature setting.
Control Panel
Operation Mode
Press the Mode button to cycle between 4 types
of air conditioner operation: Energy Saving / Cool /
Dry / Fan.
Energy Saving - This mode increases the
temperature to the optimal level for minimizing
power consumption.
NOTE
• The temperature automatically sets to 72 °F if
• The temperature automatically increases to
Cool - This mode is ideal on hot days to cool and
dehumidify the room quickly. Use the Temp
buttons to set the desired room temperature and
use the Fan Speed button to set the desired fan
circulation speed.
Dry - This mode is ideal for rainy and damp days
to dehumidify the room rather than cooling it
significantly. Humidity is removed from the room by
the combination of compressor operation and the
fan speed fixed at Low. The compressor and fan
turn off once the set temperature is reached. Fan
speed cannot be adjusted in Dry mode.
Fan - In this mode the fan circulates air but the
compressor does not run. Use the Fan Speed
button to set fan speed to Auto (AU), Low (F1) or
High (F2). In this mode, you cannot adjust the set
temperature.
set temperature is below 72 °F.
78 °F if set temperature is below 78 °F.
EN
Remote Control
13
Advertisement
Table of Contents
