Advertisement
Figure 8. Removing the front cover
Installing the front cover on an 8233-E8B or 8236-E8C system
Use this procedure to install the cover after accessing components or performing service.
To install the front cover, follow these steps:
1. Align the cover with the system.
2. Gently push the cover in until the four cover clips are seated in their respective mounting posts (B)
on the system.
3. Replace the two screws (C) that secure the system to the rack (A).
26
Power Systems: System processor assembly for the 8233-E8B and 8236-E8C
Advertisement
