Debug Mvrdbg - Cisco Catalyst 3560X-24P Command Reference Manual
Cisco ios release 12.2(55)se
Hide thumbs
Also See for Catalyst 3560X-24P:
- Technical specifications (6 pages) ,
- Datasheet (29 pages)
Table of Contents
Advertisement
Appendix B
Catalyst 3750-X and 3560-X Switch Debug Commands
debug mvrdbg
Use the debug mvrdbg privileged EXEC command to enable debugging of Multicast VLAN
Registration (MVR). Use the no form of this command to disable debugging.
Syntax Description
all
events
igmpsn
management
ports
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(53)SE2
Usage Guidelines
The undebug mvrdbg command is the same as the no debug mvrdbg command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
Command
show debugging
show mvr
OL-21522-02
debug mvrdbg {all | events | igmpsn | management | ports}
no debug mvrdbg {all | events | igmpsn | management | ports}
Display all MVR activity debug messages.
Display MVR event-handling debug messages.
Display MVR Internet Group Management Protocol (IGMP) snooping-activity
debug messages.
Display MVR management-activity debug messages.
Display MVR port debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the current MVR configuration.
Catalyst 3750-X and 3560-X Switch Command Reference
debug mvrdbg
B-31
Advertisement
Table of Contents
