Copying Image Files By Using Ftp; Preparing To Download Or Upload An Image File By Using Ftp - Cisco ME 3400 Software Configuration Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages) ,
- Getting started manual (33 pages)
Table of Contents
Advertisement
Working with Software Images
Copying Image Files By Using FTP
You can download a switch image from an FTP server or upload the image from the switch to an FTP
server.
You download a switch image file from a server to upgrade the switch software. You can overwrite the
current image with the new one or keep the current image after a download.
You upload a switch image file to a server for backup purposes. You can use this uploaded image for
future downloads to the switch or another switch of the same type.
Instead of using the copy privileged EXEC command or the archive tar privileged EXEC command, we
Note
recommend using the archive download-sw and archive upload-sw privileged EXEC commands to
download and upload software image files.
These sections contain this configuration information:
•
•
•
Preparing to Download or Upload an Image File By Using FTP
You can copy images files to or from an FTP server.
The FTP protocol requires a client to send a remote username and password on each FTP request to a
server. When you copy an image file from the switch to a server by using FTP, the Cisco IOS software
sends the first valid username in this list:
•
•
•
The switch sends the first valid password in this list:
•
•
•
The username and password must be associated with an account on the FTP server. If you are writing to
the server, the FTP server must be properly configured to accept the FTP write request from you.
Use the ip ftp username and ip ftp password commands to specify a username and password for all
copies. Include the username in the archive download-sw or archive upload-sw privileged EXEC
command if you want to specify a username only for that operation.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
B-28
Appendix B
Preparing to Download or Upload an Image File By Using FTP, page B-28
Downloading an Image File By Using FTP, page B-29
Uploading an Image File By Using FTP, page B-31
The username specified in the archive download-sw or archive upload-sw privileged EXEC
command if a username is specified.
The username set by the ip ftp username username global configuration command if the command
is configured.
Anonymous.
The password specified in the archive download-sw or archive upload-sw privileged EXEC
command if a password is specified.
The password set by the ip ftp password password global configuration command if the command
is configured.
The switch forms a password named username@switchname.domain. The variable username is the
username associated with the current session, switchname is the configured hostname, and domain
is the domain of the switch.
Working with the Cisco IOS File System, Configuration Files, and Software Images
OL-9639-07
- Quick Links:
- Performance Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
