Table of Contents
Advertisement
4 Disconnect the fan cable from the FAN_HDD connector on the system board (see "System Board
Components" on page 89).
5 Press the release latch on the hard drive fan and slide it out from between the hard drive bays, then lift
it from the computer.
1
Installing the Optional Hard Drive Fan
1 Slide the fan between the hard drive bays until it snaps into place.
2 Connect the fan cable to the FAN_HDD connector on the system board (see "System Board
Components" on page 89).
3 Replace the computer cover (see "Replacing the Computer Cover" on page 160).
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into your
computer.
4 Connect your computer and devices to electrical outlets, and then turn them on.
hard-drive fan release latch
2
hard drive fan
Removing and Installing Parts
1
2
139
- Quick Links:
- Diagnostic Lights
- System Board Components
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
