Table of Contents
Advertisement
Displaying Status and Configuration Settings
Step 1
Step 2
Step 3
Table 6-5
Port Status
Status
Handset Status
OnHook
OffHook
Ringing
OnCall
Cisco CallManager Link Status
Down
Register
<directory number>
Unregister
PeerInUse
KeepCall
Cisco VG248 Analog Phone Gateway Software Configuration Guide
6-18
To display port status, perform these steps:
From the main screen, choose Display.
Choose Port status.
The Port status indicates information about the status of the handset of the analog
device connected to the port and about the link to Cisco CallManager.
Use the information in
Description
Not currently in use.
User has lifted the handset.
Incoming call to this port.
A call has been established and voice packets are moving across the network.
Link is not up (either because the port is not enabled or because of a temporary
failure).
Port is registering with Cisco CallManager
Directory number for the port displays indicating that the port is up and
available for use.
Unregistering from Cisco CallManager. Displays if port is being disabled or
reset.
The port's directory number is in use by another phone that shares the directory
number. The port is not available for use while a call is active on the other
phone.
The Cisco CallManager link has gone down, but the call that was in progress
is being maintained.
Table 6-5
to interpret the port status.
Chapter 6
Troubleshooting the VG248
OL-1209-02
- Quick Links:
- Accessing Configuration Options
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
